Creek Audio Destiny Kullanım Talimatları Kılavuzu - Sayfa 2

CD Çalar Creek Audio Destiny için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Creek Audio Destiny 8 sayfaları.

Sayfayı Yazdır
Destiny CD PLAYER

SPECIFICATION

Power requirements
(Selectable by switch on underside of player)
Power consumption
Mains filtering
Power supply
Frequency response
Output level
Output impedance
D to A type
Total harmonic distortion
THD + Noise
Dynamic range
Clock type
Number of channels
Digital output
Laser type
Wavelength
Light output (cw)
Transport
Software
Case
Weight
Dimensions (W x H x D) mm
Remote control
MAINS VOLTAGE AND FREQUENCY IS INTERNALLY SET FOR THE COUNTRY OF USE
Creek Audio Ltd reserves the right to change or modify the specification of its products without prior warning

WARRANTY

If within two years of purchase date your Destiny product proves to be defective for any reason other than accident,
misuse, neglect, unauthorized modification, or fair wear and tear, Creek Audio Ltd. will, at its discretion, replace the faulty
parts without charge for labour or return carriage within the U.K.
This warranty is valid only in the U.K. and given in addition to statutory rights.
Service enquiries outside the U.K. should be addressed first to the supplying dealer and/or the Creek distributor/importer.
Warranties granted in these countries are entirely at the discretion of the distributor.
Page Two
Supplied 220/240-50 Hz or 100/120-60Hz
20 W max 6 W in standby mode
Multi-pole bi-directional
3 fully encapsulated PCB toroidal transformers
for transport, logic and analogue circuitry
1 Hz - 20 kHz ±0.25 dB
2.0 V RMS at 1 kHz, 0 dB
50
recommended min load 1 K
24 bit - 192 kHz (> 120 dB) Crystal CS4396
< 0.0008% at 1 kHz, 0 dB
> -97dB
> 117dB
Temperature compensated ultra low jitter and
phase noise module with re-clocking
2 via high quality solid RCA gold plated sockets
Re-clocked optical via TORX and transformer
coupled co-axial gold plated RCA socket.
Semiconductor ALGaAs
790 nm ± 25 nm
0.18 mW typical
DVD loader with ATAPI interface.
upgradeable
Custom Creek software, running loader, display,
remote control and DAC.
Upgradeable via plug-in EPROM
Built with custom Creek extruded panels
throughout
6 Kg
(13.2 lbs)
430 x 70 x 310 (16.9 x 2.7 x 12.2 inches)
Custom Creek SRC2 system remote handset
Uses RC5 codes
Firmware