Creek Audio EVOLUTION 50CD Kullanım Kılavuzu - Sayfa 6
CD Çalar Creek Audio EVOLUTION 50CD için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Creek Audio EVOLUTION 50CD 13 sayfaları. Dac / cd player
Ayrıca Creek Audio EVOLUTION 50CD için: Kullanım Kılavuzu (13 sayfalar)
Sayfayı Yazdır2 x
XLR balanced audio outputs, Left and Right.
1 x
Mains input - 3 pin IEC with ground connection and fuse.
Use the power cord supplied, which is suitable for use in your country or region.
RC Bus connecting the out to a matching EVOLUTION 50A amplifier allows one to control
both products with the use of one IR sensor. Using the appropriate accessory from Creek,
it also allows the product to be installed in a hidden location and still operated by using an
optional extension IR receiver. Consult your dealer or www.creekaudio.com for price and
availability.
FRONT PANEL CONTROLS
POWER
The mains On/Off switch is a button located on the right hand side of the front panel with
the engraved power symbol above it. Press this button to power the EVOLUTION 50CD on
or off. Please note that the EVOLUTION 50CD does not have a Standby power function.
CD OPERATON
There is a group of 5 buttons next to the slot for CD operation, plus a Repeat button in the
group of 4 buttons right of the display. Listing buttons in a clockwise order:
PLAY/PAUSE
Press the Play button once to play the first track. Press once again to Pause while playing.
Press Play to start playing the disc. If available, CD text will scroll across the top of the dis-
play, indicating among other things possible, the artist, album and track name.
STOP
Press the Stop button to end play.
LOADING/EJECTING A DISC
To load a disc, simply post one through the slot aperture on the left hand side of the front
panel, with the label facing upwards, being careful not to put finger prints or dirt etc. on the
playing surface. The mechanism will sense the proximity of the disc after it is half way in. It
will then automatically draw the disc inside completely and read its Table of Contents (TOC),
which will be displayed. It will then be in the Stop position.
EJECT
To remove a disc, press the Eject button to force the disc out of the slot drive. Pressing Eject
while the disc is playing will not harm the disc.
DISP
Page: 4