Digikeijs DR5033 Kullanım Kılavuzu - Sayfa 9

Genişletici Digikeijs DR5033 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Digikeijs DR5033 18 sayfaları. 3-ampere, h-bridge dcc booster
Ayrıca Digikeijs DR5033 için: Manuel (10 sayfalar), Kullanım Kılavuzu (18 sayfalar)

Sayfayı Yazdır
Digikeijs DR5033 Kullanım Kılavuzu
DR5033 DIGIBOOST
4.2 Tested central units and connection types
Central
Connection Possibil-
ities Central
DR5000
B-Bus®
LocoNet® „B"
Roco®/Fleischmann®
Z 21®
B-Bus®
Sniffer Input
LocoNet®
Roco®/Fleischmann®
z21®/z21®Start
B-Bus®
Sniffer Eingang
www.digikeijs.com
® R-Bus, B-Bus are trademarks which are registered in the name of Modelleisenbahn GmbH. XpressNet and RS-Bus is a trademark registered in the name of Lenz
Stand 2021-07-06
Our recommendation! Full booster connection.
Our recommendation!
(if the number of 4
Booster is sufficient)
Our recommendation! Railcom® is recognized and passed on by the booster.
Our recommendation!
(if the number of 4
Booster is sufficient)
Our recommendation! Railcom® is recognized and passed on by the booster.
No Railcom®, max. 4 boosters possible.
Railcom® is generated by the DR5000 and passed on to the booster. The status of
the DR5033, for example, can be queried via LocoNet®. In addition, the booster can
be individually switched off and on again via a magnetic article address.
No Railcom®, max. 4 boosters possible.
Since the Z 21® has no LocoNet® "B" connection, the DR5033 can only be config-
ured. Operation via LocoNet® „B" on the Z 21 is therefore not possible.
No Railcom®, max. 4 boosters possible.
special features
P 9