ARCHPOT APF Kurulum ve Kullanım Kılavuzu - Sayfa 4

Brülör ARCHPOT APF için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. ARCHPOT APF 8 sayfaları. Manual burner system

Product

Installation

WARNING! This unit is for outdoor use only.

• Do not install near any combustibles such as wood structures, fuels, clothing, fabrics, or dry vegetation.

• Installation shall be performed by a licensed contractor. All aspects of installation must conform to local

or national codes, or in the absence of codes, with Natural Fuel Gas Code ANZI Z223.1.

• An approved gas valve or keyed valve shall be installed in the decorative bowl or upstream of the unit and

located in an accessible area that is within 5ft from the APF Manual System.

Note: All APF Manual Systems includes pre-installed key valve, unless otherwise specified.

• The approved gas valve must be located where they can be easily accessible so that the gas can be shut off

quickly in case of an emergency.

Installation

1. Install the Fire Feature as shown in Figure 1 and Figure 2.

2. 24"- 60" Geo Round, 24"- 48" Legacy Round, 24"- 36" Geo Square, 30"- 36" Legacy Square requires

installation of the APF Mounting Bracket to secure the vessel and allow for ventilation and drainage. Install

the mounting bracket as shown in Figure 1. Using appropriate anchor bolts, (not supplied), secure the APF

bottom bracket to a suitable, stable permanent surface. Place the GFRC vessel over the bottom bracket so the

all thread is accessible from top of vessel. Attach the APF top ring bracket using the supplied bolts. Do not seal

open space between mounting bracket and vessel. Warranty is voided if the mounting bracket is not installed

on required models.

Figure 1

APF BOTTOM

MOUNTING BRACKET

ANCHOR BOLTS (NOT SUPPLIED)

SUPPLIED NUTS

AND WASHERS

NOTE: Drainage MUST be provided in the bottom of each bowl.

APF TOP

RING BRACKET

GFRC VESSEL