Sharp Notevision PG-M17X Kullanım Kılavuzu - Sayfa 15
Projektör Sharp Notevision PG-M17X için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sharp Notevision PG-M17X 37 sayfaları. Digital multimedia projector
Ayrıca Sharp Notevision PG-M17X için: Kullanım Kılavuzu (36 sayfalar), Kullanım Talimatları Kılavuzu (36 sayfalar), Kullanım Kılavuzu (36 sayfalar), Kullanım Kılavuzu (36 sayfalar)
Sayfayı Yazdır
E
nglish
Installation
Downloaded from:
Powering Off the Projector
1. Press the Power/Standby button to turn off the projector
lamp.
2. After pressing the Power/Standby button, you will see a
message Power off the lamp? on the on-screen display.
Press the Power/Standby button again to confirm. Other
wise the message will disappear after 5 seconds.
3. Power/Standby indicator flashes red for about 2 minutes.
The projector will automatically shut itself down.
4. Disconnect the power cord from the electrical outlet and
the projector.
When the TEMP indicator flashes red for about 10 seconds, you
v
will see a message Fan Fail on the on-screen display. After 5
seconds, the Power/Standby indicator flashes green for about 2
minutes and the projector will automatically shut itself down.
Please contact your local reseller or service center.
v
When the TEMP indicator lights solid red for about 10 seconds,
it indicates the projector has been overheated. You will see a
message Over Temperature on the on-screen display. After 5
seconds, the Power/Standby indicator flashes green for about 2
minutes and the projector will automatically shut itself down.
Please contact your local reseller or service center.
v
When the LAMP indicator lights solid orange and Power/
Standby indicator flashes green for about 2 minutes. The projec-
tor will automatically shut itself down. Please contact your local
reseller or service center.
When Power Cord is inserted, if inside temperature is high,
v
TEMP indicator flashes red until inside becomes cool. At
that time, Power/Standby button is not functional. Please
press the Power/Standby button after confirming TEMP
indicator is off.
http://www.usersmanualguide.com/
12