Shimano ST-RS200 Bayi El Kitabı - Sayfa 20

Bisiklet Aksesuarları Shimano ST-RS200 için çevrimiçi göz atın veya pdf Bayi El Kitabı indirin. Shimano ST-RS200 48 sayfaları. Shifting lever

Sayfayı Yazdır

MAINTENANCE

Disassembling the bracket body and lever body

MAINTENANCE

Disassembling the bracket body and lever body

[1]

(A)

(z)

(B)

First use the Shimano original tool (sold

(y)

separately) to remove the E-ring.

[2]

[A]

Use part [B] of the Shimano original

E-ring removal tool [2] to align the E-ring

with the direction of removal.

Next, set part [A] against the E-ring and

remove the E-ring.

[B]

Insert a hexagon wrench or similar tool

(A)

into the lever axle hole, tap it gently

with a plastic mallet to push out the

lever axle, which disassembles it into the

bracket body and the lever body.

(y)

Shimano original E-ring removal

tool:

[1] Y6RT66000

[2] Y6RT68000

(z)

E-ring removal direction

(A)

E-ring

CAUTION

When you remove the E-ring, it may pop out;

wear protective glasses while removing it.

Check that there is no one and nothing

around you before starting the removal.

TECH TIPS

The illustration is of the right-hand lever.

(A)

Hexagon wrench

(B)

Plastic mallet

NOTE

Always be sure to remove the lever axle in this

direction. If it is removed in the opposite

direction, it may damage the bracket body.