Digital Check SB 600 Kullanıcı Kılavuzu - Sayfa 14
Tarayıcı Digital Check SB 600 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Digital Check SB 600 16 sayfaları. Sb series
Ayrıca Digital Check SB 600 için: Kolay Kurulum Kılavuzu (1 sayfalar)
Sayfayı Yazdır
Common Error Codes from the Scanner
-216
Misfeed (The document failed to enter the path on time).
Remove the document and re-insert it.
Check for bent or excessively curled leading edges and straighten as
needed.
If they continue to get -216 errors, this might indicate that;
o The entry drive rollers may be dirty
o Something may be lodged in the path
-220
Document Stopped in the path or did not exit on time
Eject the documents, to clear the error condition.
Check the leading edges and corners of the document and straighten as
needed.
A -220 error code where the document is stopping in the path repeatedly
could indicate debris, paper or a staple in the path. Check if the document's
leading edge looks OK or is catching on something.
The scanner may need to be cleaned.
-212
No Checks (There are no checks indicated in the entry pocket)
A scan cycle has been initiated, but there is not a document present. Re-insert
the document and try the feeding it again.
-125
No Scanner (The scanner was not found while attempting to initialize the
scanner)
Check the USB cable connections.
Try a different cable.
Try a different USB port.
Verify that the PC has the proper drivers and the scanner firmware file is
installed.
14
v061311