Siemens simatic ET 200MP Manuel - Sayfa 19

Endüstriyel Ekipmanlar Siemens simatic ET 200MP için çevrimiçi göz atın veya pdf Manuel indirin. Siemens simatic ET 200MP 40 sayfaları. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Ayrıca Siemens simatic ET 200MP için: Manuel (24 sayfalar), Manuel (29 sayfalar), Manuel (47 sayfalar), Manuel (26 sayfalar), Manuel (28 sayfalar), Manuel (50 sayfalar), Manuel (34 sayfalar), Kullanıcı Kılavuzu (44 sayfalar), Manuel (30 sayfalar), Manuel (25 sayfalar), Manuel (42 sayfalar), Manuel (28 sayfalar), Manuel (33 sayfalar), Manuel (49 sayfalar), Manuel (36 sayfalar), Manuel (39 sayfalar), Manuel (28 sayfalar), Ekipman Kılavuzu (35 sayfalar), Ekipman Kılavuzu (32 sayfalar), Manuel (29 sayfalar), Manuel (34 sayfalar), Manuel (36 sayfalar), Ekipman Kılavuzu (50 sayfalar), Manuel (45 sayfalar)

Sayfayı Yazdır

4.4

Address space

The module can be configured differently in STEP 7; see following table. Depending on the

configuration, additional/different addresses are assigned in the process image of the

outputs/inputs.

Configuration options of AQ 4xU/I ST

You can configure the module with STEP 7 (TIA Portal) or with a GSD file.

When you configure the module by means of the GSD file, the configurations are available

under different abbreviations/module names.

The following configurations are possible:

Table 4- 3

Configuration options

Configuration

1 x 4-channel without value status

1 x 4-channel with value status

4 x 1-channel without value status

4 x 1-channel with value status

1 x 4-channel with value status for

module-internal Shared Output with

up to 4 submodules

Value status (Quality Information, QI)

The value status is always activated for the following module names:

● AQ 4xU/I ST QI

● AQ 4xU/I ST S QI

● AQ 4xU/I ST MSO

An additional bit is assigned to each channel for the value status. The bit for the value status

indicates if the output value specified by the user program is actually pending at the module

terminal (0 = value is incorrect).

Analog output module AQ 4xU/I ST (6ES7532-5HD00-0AB0)

Manual, 09/2016, A5E03484696-AD

Abbreviation/module

name in the GSD file

Integrated in hardware cata-

AQ 4xU/I ST

AQ 4xU/I ST QI

AQ 4xU/I ST S

AQ 4xU/I ST S QI

AQ 4xU/I ST MSO

Configuration software, e.g., with STEP 7 (TIA Portal)

log STEP 7 (TIA Portal)

V12 or higher

V13 Update 3 or higher

(PROFINET IO only)

V13 Update 3 or higher

(PROFINET IO only)

V13 Update 3 or higher

(PROFINET IO only)

Parameters/address space

4.4 Address space

GSD file in

STEP 7 (TIA Portal) V12 or

higher or STEP 7 V5.5 SP3 or

higher

(PROFINET IO only)