Siemens simatic ET 200MP Manuel - Sayfa 21

Endüstriyel Ekipmanlar Siemens simatic ET 200MP için çevrimiçi göz atın veya pdf Manuel indirin. Siemens simatic ET 200MP 40 sayfaları. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Ayrıca Siemens simatic ET 200MP için: Manuel (24 sayfalar), Manuel (29 sayfalar), Manuel (47 sayfalar), Manuel (26 sayfalar), Manuel (28 sayfalar), Manuel (50 sayfalar), Manuel (34 sayfalar), Kullanıcı Kılavuzu (44 sayfalar), Manuel (30 sayfalar), Manuel (25 sayfalar), Manuel (42 sayfalar), Manuel (28 sayfalar), Manuel (33 sayfalar), Manuel (49 sayfalar), Manuel (36 sayfalar), Manuel (39 sayfalar), Manuel (28 sayfalar), Ekipman Kılavuzu (35 sayfalar), Ekipman Kılavuzu (32 sayfalar), Manuel (29 sayfalar), Manuel (34 sayfalar), Manuel (36 sayfalar), Ekipman Kılavuzu (50 sayfalar), Manuel (45 sayfalar)

Sayfayı Yazdır

Address space for configuration as 4 x 1-channel AQ 4xU/I ST S QI

For the configuration as a 4 x 1-channel module, the channels of the module are divided into

multiple submodules. The submodules can be assigned to different IO controllers when the

module is used in a shared device.

The number of usable IO controllers depends on the interface module used. Observe the

information in the manual for the particular interface module.

Unlike the 1 x 4-channel module configuration, each of the four submodules has a freely

assignable start address.

Figure 4-2

Address space for configuration as 1 x 4-channel AQ 4xU/I ST MSO

For the configuration as a 1 x 4-channel module (module-internal Shared Output, MSO),

channels 0 to 3 of the module are copied to multiple submodules. Channels 0 to 3 are then

available with identical values in various submodules. These submodules can be assigned to

up to four IO controllers when the module is used in a shared device.

● The IO controller to which submodule 1 is assigned has write access to outputs 0 to 3.

● The IO controllers to which submodule 2, 3, or 4 is assigned have read access to outputs

0 to 3.

The number of usable IO controllers depends on the interface module used. Please observe

the information in the manual for the particular interface module.

Analog output module AQ 4xU/I ST (6ES7532-5HD00-0AB0)

Manual, 09/2016, A5E03484696-AD

Address space for configuration as 4 x 1-channel AQ 4xU/I ST S QI with value status

Parameters/address space

4.4 Address space