Siemens Simatic S7-300 Başlarken - Sayfa 7

Endüstriyel Ekipmanlar Siemens Simatic S7-300 için çevrimiçi göz atın veya pdf Başlarken indirin. Siemens Simatic S7-300 8 sayfaları. Automation systems, controlling a physical axis
Ayrıca Siemens Simatic S7-300 için: Kullanıcı Kılavuzu (34 sayfalar), Manuel (21 sayfalar), Kullanım Talimatları (4 sayfalar), Kullanım Talimatları (5 sayfalar), Manuel (35 sayfalar), Başlarken (16 sayfalar), Uygulama Açıklaması (24 sayfalar), Manuel (18 sayfalar), Manuel (32 sayfalar), Kurulum ve Donanım Kılavuzu (20 sayfalar), Başlarken (32 sayfalar)

Sayfayı Yazdır

Step 5: Configuring the Hardware

Stage

In SIMATIC Manager, click SIMATIC 300 Station in the

left-hand part of the window.

Double-click the Hardware button in the right-hand part

of the window.

If a catalog is not displayed in the right-hand part of

the window, activate the catalog by choosing the

Catalog command from the View menu.

Navigate to DI-300 via SIMATIC 300 and SM-300.

Insert the SM 321DI16xDC24V whose order num-

ber corresponds to the order number on your DI by

dragging and dropping it on slot 4 (the upper or

lower left-hand window).

Note:

You can find out the order number if you click a DI in

the catalog. The order number of this DI then appears

in the text box under the catalog.

Navigate to DO-300 .

Insert the SM 322 DO16xDC24V/0.5A whose order

number corresponds to the order number on your DO

by dragging and dropping it on slot 5.

Check that the order number displayed for slot 2 in the

lower left-hand part of the window corresponds to the

order number on your CPU.

If necessary, widen the order number column to dis-

play the whole order number.

From the Station menu, choose the Save and Compile

command.

Close the editor.

S7-300 Programmable Controller, Getting Started, First Steps for Installation and Commissioning

A5E00069340 01 // 04/2000

Procedure

Result

The buttons Hardware and CPU 314(1) appear

in the right-hand part of the window.

The hardware configuration editor opens.

A list containing different DOs appears.

The module appears on slot 5.

If yes: Continue from stage 7.

If not: Navigate in the catalog via CPU 300 to

CPU 314 and replace the CPU on slot 2 with the

CPU with the correct order number from the ca-

talog by dragging and dropping it.

The hardware configuration is compiled and sa-

ved.

The editor is closed.