Siemens SIMOGEAR BA 2039 Kullanım Talimatları Kılavuzu - Sayfa 26
Endüstriyel Ekipmanlar Siemens SIMOGEAR BA 2039 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Siemens SIMOGEAR BA 2039 40 sayfaları. Adapter for gearbox
Sayfayı Yazdır
Installing
3.5 Mounting the motor
3.5.4
Mount servomotor without parallel key to the KQS adapter
NOTICE
Damage to the bearing caused by excessive forces
Avoid axial forces when installing on the motor.
NOTICE
Soiling impairs the torque transmission
Any soiling in the vicinity of the shaft/hub connection will have a detrimental effect on the
torque transmission.
Keep the drill hole and motor shaft completely free from grease.
Do not use soiled cleaning cloths or contaminated solvents.
Note
Dimension z12 applies for standard assignment of the coupling. If a special assignment is
required, consult the appropriate special dimension drawing.
Note
Reduce assembling force
Lightly grease the gear ring tooth flanks of the flexible element 1557 or the hub with the
supplied assembly paste.
Alternatively the following are permissible:
• Mineral-oil based oils or greases
• Silicon-based lubricants
• Petroleum jelly.
26
ATEX version gearboxes
Impacts can cause sparks.
Apply adhesive (medium strength, e.g. Loctite 243) to the bolts 1505 and 1 or 1*.
Operating Instructions, 04/2016, A5E37431501A/RS-AC
BA 2039