Siemens SIMOGEAR BA 2039 Kullanım Talimatları Kılavuzu - Sayfa 27
Endüstriyel Ekipmanlar Siemens SIMOGEAR BA 2039 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Siemens SIMOGEAR BA 2039 40 sayfaları. Adapter for gearbox
Sayfayı Yazdır
Sizes 703 to 708
1. 1*
1505 Bolt
1555 Coupling half
Image 3-6
Procedure
1. Loosen the bolt 1 or 1* slightly.
2. Fit the coupling half 1556 onto the motor shaft end. See Mounting an input or output
element on the gearbox shaft (Page 17).
3. Maintain the clearances z12 and z.
4. Apply adhesive (medium strength, e.g. Loctite 243) to the bolts 1 or 1*.
5. KQS 703 to 708:
Tighten bolt 1 with the specified torque T
KQS 710:
Tighten the bolt 1* with across-flats dimension SW evenly and gradually in a crossways
pattern. Repeat the procedure until the specified T
6. Place the flexible element 1557 inside the coupling half 1555.
7. Lightly grease the gear ring tooth flanks of the flexible element 1557 or the hub with the
supplied assembly paste.
8. Apply adhesive (medium strength, e.g. Loctite 243) to the bolts 1505.
9. Fasten the motor with the bolts 1505 with the prescribed torque. See Thread sizes and
tightening torques for fastening bolts (Page 17).
You have mounted the servomotor on the KQS adapter.
BA 2039
Operating Instructions, 04/2016, A5E37431501A/RS-AC
Bolt
KQS adapter
Size 710
1556 Coupling half
1557 Flexible element
SW and across-flats dimension SW.
A
SW torque has been reached.
A
Installing
3.5 Mounting the motor
27