Siemens SITRANS WW300 Kullanım Talimatları Kılavuzu - Sayfa 13
Endüstriyel Ekipmanlar Siemens SITRANS WW300 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Siemens SITRANS WW300 28 sayfaları. Weighfeeders
Ayrıca Siemens SITRANS WW300 için: Kullanım Talimatları Kılavuzu (42 sayfalar)
Sayfayı Yazdır
Calibration
After SITRANS WW300 has been properly installed, calibration of the weighing system
must be done in conjunction with the integrator. Refer to the integrator instruction
manual for programming and calibration. The calibration is initially done using the
supplied test load. Material tests are recommended to achieve maximum accuracy.
Test Load
The test load value for your SITRANS WW300 is given on the accompanying factory test
sheet, in kilograms per meter or pounds per foot.
Zero
Perform the zero calibration as described in the Calibration section of the integrator
manual.
Span
The test load used in the calibration procedure is a set of factory sized and supplied test
weights (2 or more).
Perform the span calibration as described in the Calibration section of the integrator
instruction manual.
After the span calibration has been completed, remove the test load and store it.
7ML19985MQ01
SITRANS WW300 - OPERATING INSTRUCTIONS
Page 9