Cisco 6800 Series Kullanıcı Kılavuzu - Sayfa 4

IP Telefon Cisco 6800 Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cisco 6800 Series 22 sayfaları. Ip phone, multiplatform phones
Ayrıca Cisco 6800 Series için: Hızlı Başlangıç Kılavuzu (3 sayfalar), Kullanıcı Kılavuzu (8 sayfalar), Bakım Kılavuzu (8 sayfalar), Kullanıcı Kılavuzu (14 sayfalar), Sorun Giderme Kılavuzu (12 sayfalar), Hızlı Başlangıç Kılavuzu (4 sayfalar), Donanım Kurulumu (20 sayfalar), Hızlı Başlangıç Kılavuzu (4 sayfalar), Kurulum Kılavuzu (39 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)

Configure a Speed Dial on a Line Key

You can press any idle line key on your phone and set up speed dial on it. The speed-dial icon, the name, and

the extension number are displayed on your phone screen next to the line key. You can also verify this change

by checking the Extended Function field on the web page. After you configure the speed dial on a line key,

you can press the line key to modify the speed-dial information and assign a new phone number and name.

You can press the line key that has speed-dial configured to speed dial a number.

You can configure your key expansion module line key as a speed dial key and you can press that line key to

speed dial a number. Your administrator configures the key expansion module line key as a speed dial key

from the phone web page.

Before you begin

Go to the web page and disable the line key that will become the speed dial key.

Procedure

Step 1

Press any idle line key on your phone for at least two seconds.

Step 2

In the Speed-Dial window, add the speed-dial name and phone number to call when you press this line key.

Step 3

Click Save.

Remove a Speed Dial from a Line Key

You can press a line key on your phone and delete speed dial assigned to it. The speed dial on the line key is

removed. Check the phone web page to confirm that the speed dial is removed.

Procedure

Step 1

Press a line key that has a speed dial configured for at least two seconds.

Step 2

Press Option > Delete in the Speed-Dial window on the phone screen.

Use the Line in Focus for Speed-Dial Calls

You can configure a line key to perform a speed dial either with a Voice Profile ID (VID) or without a VID.

When both are configured, VID has a higher priority. The call is routed to that line.

If a line key is configured without VID, you can configure a speed-dial key to use the line in focus.

Procedure

Step 1

Configure a speed-dial key without using VID.

Step 2

Change the focus to the line that you prefer.

Step 3

Press the speed-dial key to make a call.

Calls