Epson 6110i - PowerLite XGA LCD Projector Kullanıcı Kılavuzu - Sayfa 9

Projektör Epson 6110i - PowerLite XGA LCD Projector için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Epson 6110i - PowerLite XGA LCD Projector 17 sayfaları. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Ayrıca Epson 6110i - PowerLite XGA LCD Projector için: Kullanıcı Kılavuzu (42 sayfalar), Kullanım Kılavuzu (36 sayfalar), Kullanım Kılavuzu (47 sayfalar), Teknik Özellikler (2 sayfalar), Tamamlayıcı Kılavuz (1 sayfalar), Hızlı Kurulum Kılavuzu (7 sayfalar), Kullanıcı Kılavuzu (1 sayfalar), Parça Listesi (1 sayfalar), Uygunluk Beyanı (4 sayfalar), Ürün Destek Bülteni (25 sayfalar), Ürün Destek Bülteni (22 sayfalar), Ürün Destek Bülteni (28 sayfalar), Ürün Destek Bülteni (41 sayfalar), Ürün Destek Bülteni (15 sayfalar), Ürün Destek Bülteni (22 sayfalar)

Sayfayı Yazdır

Epson 6110i - PowerLite XGA LCD Projector Kullanıcı Kılavuzu

Operating Two or More Projectors

with the Remote Control

If you're using more than one projector, you can control all

the projectors—or just selected ones—by using the projector

ID system. To operate a projector, you have to set the remote

control's ID to match that of the projector. Or you can

control all the projectors at once by setting the remote

control's ID to zero.

Setting the Projector ID

The projector's default ID is set to Off. This lets it respond to

commands from any remote control. To change the ID,

follow these steps:

1. Press the

button on the remote control.

2. Select

Extended > Projector ID

3. Use the

pointer button to highlight the new ID, and

press

to select it.

Enter

4. When done, press

Setting the Remote Control ID

The remote control's default ID is zero. This lets you operate

any projector. To set it to operate a specific projector, follow

these steps:

1. Point the remote control at the projector you want to be

able to operate.

Note: If you're using a remote control ID other than the default

ID of zero, you have to set the ID each time you turn on the

projector.

to exit the menu system.

2. Press and hold the

3. While holding the ID button, press a numbered button on

the remote control (0 through 9) to select the desired ID.

Select zero to control all projectors, or select a number to

match the ID of the projector(s) you want to operate.

After setting the ID, you can check whether the remote

control works with a specific projector:

1. Point the remote control at the projector you want to check.

2. Press the

button on the remote control. You see a

message on the screen like one of these:

If the message says the remote control is

use the remote control to operate that projector. If it says

, then you have to change the ID of the remote control

Off

and/or projector before operation is possible.

Projector Status Lights

The lights on top of the projector indicate the projector's

status and let you know when a problem occurs.

Power light

Refer to the following table for a complete description of the

projector's status lights and their meanings.

12/07

Epson PowerLite 6110i

button on the remote control.

, then you can

Lamp light

Temperature light

Filter light