EPSON PowerLite 7700p Projector
Resizing the Image
Some computer images need to be resized to display in the
projector's native format: 1024
your computer image is displayed, you can correct it with the
button.
Resize
Press the
button on the control panel. The screen
Resize
image is automatically compressed.
Continue pressing the
Resize
screen in the original resolution.
If you're projecting from video equipment, pressing the
button switches the aspect ratio between 4:3 and 16:9.
Resize
If you've zoomed in on your image (using the
on the remote), you can press the
original display size.
Adjusting the Image Shape
If the projected image isn't square or has a "keystone" shape,
do one or more of the following:
If your image looks like
projector off to one side of the screen, at an angle. Move it
directly in front of the center of the screen, facing the screen
squarely.
If your image looks like
side of the
button to correct the shape of the
Keystone
image. After correction, your image will be slightly smaller.
You can also perform electronic keystone correction using the
projector's Setting menu.
Switching Between Picture Sources
If your projector is connected to more than one computer
and/or video source, you can use the buttons on the control
panel (or remote control) to switch between the different
sources.
On the control panel, press the
between the computer sources and press the
switch between standard (composite) video, S-Video, and
component video (BNC).
On the remote control:
Press the
button to switch between a standard
Video
composite video source and an S-Video source.
Press the
button to select your first computer.
Comp1
Press the
Comp2/YCbCr
computer or a component video source.
After you select a source, the screen goes dark for a moment
before the image appears.
6 - EPSON PowerLite 7700p Projector
768 pixels. If only part of
button to pan around the
E-Zoom
button to restore the
Resize
or
, you've placed the
or
, press the + or —
button to switch
Computer
button to
Video
button to select your second
Projector Status Lights
The lights on top of the projector indicate the projector's
operating status.
power light
lamp light
temperature light
button
Light
Status
Orange
Flashing
green
Green
Flashing
orange
Red
Flashing
orange
Flashing red
Flashing
orange
11/00
Power
Computer
A/V mute
Resize
Description and action
The projector is in sleep mode. You can
unplug it to turn it off, or press the Power
button to turn it on.
The projector is warming up. Wait for the
image to appear.
The projector is operating normally.
The projector is cooling down. When the light
is flashing, you cannot turn the projector on,
and you should not unplug it.
Power is cut off because of an internal
problem. Remove the power plug and contact
EPSON for help.
The lamp is almost burned out. This is a good
time to replace it.
The lamp is burned out or there is a problem
with the ballast power. Replace the lamp and
make sure the cover is fastened securely.
The projector is too hot. Turn it off and let it
cool. Make sure the temperature surrounding
the projector does not exceed 104° F and
there is plenty of space around and under the
projector for ventilation. Clean the air filter if
necessary.
Sayfayı Yazdır