Light
Status
Description and action
Red
The projector has turned off automatically
because it has overheated. Let it cool for a few
minutes, then turn it back on. Make sure there
is plenty of space around and under the
projector for ventilation. If it continues to
overheat, you may need to change the air
filter.
Flashing red
There is a problem with the cooling fan or
temperature sensor. Turn off the projector and
unplug it. Contact EPSON for help.
Using the Control Panel
Power
Computer
Video
A/V mute
Resize
Shift
The following table summarizes the functions on the control
panel.
Button
Function
Power
Starts or stops projection.
Help
Displays the online help menu.
Computer
Switches between Computer 1 and Computer 2.
A/V mute
Turns off the audio and video, displaying the black,
blue, or user logo background.
Resize
Resizes SXGA and other video formats so they
appear correctly on the screen. Switches the aspect
ratio between 4:3 and 16:9 when video images are
being projected.
Video
Switches between standard (composite) video,
S-Video, and component video (BNC).
Menu
Displays or hides the menu screen.
Esc
Stops the current function. Pressing Esc while viewing
a menu or the online help displays the previous
screen or menu.
+
Sync
Synchronizes the computer's graphic signal. Use
Sync –
these buttons to adjust an image that is fuzzy or
streaked, or to select menu items. Allows selection of
a menu if the menu screen is displayed.
Menu
Sync
Esc
Help
Tracking
Tracking
Keystone
Volume
Sync
EPSON PowerLite 7700p Projector
Button
Function
Tracking –
Matches the projector's internal clock to computer
+
Tracking
graphic signals (tracking adjustment). Use these
buttons to adjust an image with vertical fuzzy lines, or
to change settings during menu operations.
Enter
Selects a menu option or the next menu/help screen.
Pressing Enter when no menu or help screen is
displayed optimizes the computer image.
Shift
Pressing the shift and Keystone buttons at the same
time increases or decreases the sound volume.
– Keystone +
Squares up a raised image, correcting up to a ±30°
tilt.
– Volume +
Adjusts the volume when pressed with the Shift
button.
Using the Remote Control
The remote control uses a line-of-sight infrared signal. It lets
you access the projector's features from anywhere in the
room—up to 32 feet away. (This distance may be shorter if
the remote control batteries are low.) If you have connected
the mouse cable, you can also use the remote control as a
wireless mouse.
The projector may not respond to remote control commands
in these conditions:
You are too far away or not within 30 to the left or right of
the front or rear sensor or 15 above or below
The
(remote control) switch is in the
R/C
Batteries are weak
Ambient light is too bright
A fluorescent light is shining into the infrared receiver
A strong light source (such as direct sunlight) shines into the
infrared receiver
Other equipment emitting infrared energy is present (such as
a radiant room heater)
11/00
EPSON PowerLite 7700p Projector - 7
position
OFF
Sayfayı Yazdır