Cisco 7832 Manuel - Sayfa 3

IP Telefon Cisco 7832 için çevrimiçi göz atın veya pdf Manuel indirin. Cisco 7832 22 sayfaları. Ip conference phone
Ayrıca Cisco 7832 için: Ürün Yazılımı Geçişi Ana Kılavuzu (31 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (21 sayfalar), Sorun Giderme Kılavuzu (10 sayfalar), Başlayın (6 sayfalar), Kurulum Kılavuzu (39 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Yeniden Yapılandırma Kılavuzu (2 sayfalar), Hızlı Başlangıç (2 sayfalar), Hızlı Başlangıç (2 sayfalar), Manuel (30 sayfalar), Talimatlar Kılavuzu (9 sayfalar), Hızlı Referans (2 sayfalar)

Sayfayı Yazdır
Cisco 7832 Manuel
Your Phone
on a phone. If your network requires it, however, you can manually configure information such as: an IP
address, TFTP server, and subnet information.
Cisco IP Phones can interact with other services and devices on your IP network to provide enhanced
functionality. For example, you can integrate Cisco Unified Communications Manager with the corporate
Lightweight Directory Access Protocol 3 (LDAP3) standard directory to enable users to search for coworker
contact information directly from their IP phones. You can also use XML to enable users to access information
such as weather, stocks, quote of the day, and other web-based information.
Finally, because the Cisco IP Phone is a network device, you can obtain detailed status information from it
directly. This information can assist you with troubleshooting any problems users might encounter when using
their IP phones. You can also obtain statistics about an active call or firmware versions on the phone.
To function in the IP telephony network, the Cisco IP Phone must connect to a network device, such as a
Cisco Catalyst switch. You must also register the Cisco IP Phone with a Cisco Unified Communications
Manager system before sending and receiving calls.
Feature Support
This document describes all the features that the device supports. However, not all features may be supported
with your current configuration. For information on supported features, contact your administrator.

New and Changed Information

You can use the information in the following sections to understand what has changed in the document. Each
section contains the major changes.
New and Changed Information for Firmware Release 12.8(1)
Table 1: New and Changed Information for Firmware Release 12.8(1)
Feature
Phone Data Migration
New and Changed for Firmware Release 12.7(1)
The following table shows the changes made for Firmware Release 12.7(1).
Table 2: Cisco IP Conference Phone 7832 User Guide Revisions for Firmware Release 12.7(1)
Revision
Updated for hunt group calls on Call Alert
New or Changed Content
Replace Your Existing Phone with a New Phone, on
page 6
Updated Section
Answer a Call Within Your Hunt Group
Your Phone
Feature Support
3