Siemens CM876G0 6 Series Kullanım Kılavuzu ve Kurulum Talimatları - Sayfa 10
Fırın Siemens CM876G0 6 Series için çevrimiçi göz atın veya pdf Kullanım Kılavuzu ve Kurulum Talimatları indirin. Siemens CM876G0 6 Series 48 sayfaları.
Sayfayı Yazdıren Operating modes
Symbol
4.5 Cooking compartment
The functions in the cooking compartment make your
appliance easier to use.
Shelf supports
The rails in the cooking compartment enable you to
place accessories at different heights.
→ "Accessories", Page 12
Your appliance has three shelf positions. The shelf pos-
itions are numbered from bottom to top.
The rails are equipped with pull-out rails on one or
more levels, depending on the appliance type.
You can remove the rails, e.g. for cleaning.
→ "Rails", Page 29
5 Operating modes
This is where you can find an overview of your appli-
ance's operating modes and main functions.
Press
to open the menu.
Operating
Use
mode
Types of
Select finely tuned types of heating for
heating
the optimal preparation of your food.
Meals
Use programmed, recommended set-
tings for various meals.
→ "Dishes", Page 19
Microwave
Cook, heat or defrost quicker with the
microwave.
→ "Microwave", Page 16
5.1 Types of heating
To ensure that you always use the right type of heating
to cook your food, we explain the differences and ap-
plications below.
The symbols for each type of heating help you to re-
member them.
10
Name
Home Connect server
Remote start
Remote diagnostics
Lighting
One or more oven lights illuminate the cooking com-
partment.
When you open the appliance door, the light in the
cooking compartment switches on. If the appliance
door remains open for longer than 15 minutes, the light
switches off again.
For most operating modes, the lighting is switched on
during operation. The lighting switches off again when
the operation ends.
Cooling fan
The cooling fan switches on and off depending on the
appliance's temperature. The hot air escapes above
the door.
ATTENTION!
Do not cover the ventilation slot above the appliance
door. The appliance overheats.
▶
To ensure that the appliance cools down more quickly
after operation, the cooling fan continues to run for a
certain period afterwards.
Appliance door
If you open the appliance door during operation, the
operation stops. When you close the appliance door,
the operation continues automatically.
In microwave mode, when you close the appliance
door, you have to press
Operating
mode
Microwave
combination
Self-clean-
ing
Basic set-
tings
Home Con-
nect
When you select a type of heating, the appliance sug-
gests a suitable temperature or setting. You can use
these values or change them within the specified
range.
Use
Home Connect server not connected
→ "Home Connect ", Page 21
Remote start activated
→ "Home Connect ", Page 21
Remote diagnostics activated
→ "Home Connect ", Page 21
Ensure that the ventilation slots are unobstructed.
Use
To reduce the cooking time, switch on
the microwave for a type of heating.
→ "Microwave combination", Page 18
The self-cleaning function cleans your
oven automatically.
→ "Self-cleaning", Page 25
Adjust the basic settings. Basic settings
→ Page 22
Connect the oven to a mobile end
device and remotely control it.
→ "Home Connect ", Page 21
to continue.