Siemens CM876G0 6 Series Kullanım Kılavuzu ve Kurulum Talimatları - Sayfa 9

Fırın Siemens CM876G0 6 Series için çevrimiçi göz atın veya pdf Kullanım Kılavuzu ve Kurulum Talimatları indirin. Siemens CM876G0 6 Series 48 sayfaları.

Sayfayı Yazdır

4.2 Buttons

Use the buttons on the left- and right-hand side of the control panel to switch your device or the operating mode on

and off.

Button

Function

On/off

Information

Childproof lock

Time-setting options

Rapid heat-up

Start/stop

4.3 Rotary selector

Use the rotary selector to change the setting values

that are shown in the display.

If you have reached the minimum or maximum value

for setting values, e.g. the temperature, this value re-

mains in the display. If required, use the rotary selector

to turn the value back again.

For lists, e.g. the types of heating, the first value starts

again after the last value.

4.4 Display

The display shows the current setting values.

The value that you can change in the display is high-

lighted in colour.

Status bar

The status bar is at the top of the display.

The time and set time functions are shown in the status

bar.

Progress line

The line is shown in the display below the highlighted

value.

The progress line shows you how much the appliance

has already heated up or how much time has elapsed.

The line is filled from left to right.

The heating line does not appear when using the mi-

crowave.

Symbols

Different symbols may appear on the display.

Symbol

Use

Switch the appliance on or off.

Open the operating mode menu

Display notifications Activate and deactivate the childproof lock

Activate and deactivate the childproof lock

Press briefly: Start or pause operation.

Press and hold for approx. three seconds: Cancel operation.

Switch rapid heat-up on and off

Start, pause or cancel the operation

Countdown

You can view the countdown time or the cooking time

for the previous operation in the top right in the status

bar.

If you have set a cooking time and the cooking time is

deleted, the countdown time takes over from the time

that has already elapsed from the cooking time. You

can therefore always check how long the operation has

already been running.

The heating line does not appear when using the mi-

crowave.

Temperature display

The heating-up control and the residual heat indicator

show you the temperature in the cooking compartment.

Due to thermal inertia, the temperature that is displayed

may differ slightly from the actual temperature inside

the cooking compartment. You can use the

to check the current temperature.

¡ Heating-up control

¡ Residual heat indicator

Name

Home Connect

Home network

Familiarising yourself with your appliance en

After the operation starts, the heating-up indicator

displays the rising temperature in the cooking com-

partment. When you are preheating the appliance,

the optimal time to place your food in the cooking

compartment is as soon as all the bars are filled.

For set levels, e.g. for grill settings, the heating-up

indicator is not displayed.

When the appliance is switched off, the display

shows the residual heat in the cooking compart-

ment. The residual heat indicator goes out at ap-

prox. 60 °C.

Use

¡ Home network and Home Con-

nect server connected

¡ The number of lines shows the

signal strength of the home net-

work

→ "Home Connect ", Page 21

Home network not connected

→ "Home Connect ", Page 21

⁠ button