Siemens HB-37 Series Kullanım Kılavuzu ve Kurulum Talimatları - Sayfa 9
Fırın Siemens HB-37 Series için çevrimiçi göz atın veya pdf Kullanım Kılavuzu ve Kurulum Talimatları indirin. Siemens HB-37 Series 32 sayfaları.
Sayfayı Yazdır
Place the wire rack on the universal pan so that
1.
both spacers
are on the rear edge of the univer-
sal pan.
Insert the universal pan between the two guide rods
2.
for a shelf position. In so doing, the wire rack is on
top of the upper guide rod.
Wire rack
on univer-
sal pan
6 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Initial use
You need to make settings for initial use before you
can use your appliance.
Setting the time on the clock
Once the appliance has been connected to the mains
or following a power failure, the time flashes on the dis-
play. The time starts at "12:00". Set the current time.
Requirement: The function selector must be set to the
"Off" position .
Use the
or
button to set the time.
1.
Press the
button.
2.
a The time that is set appears on the display.
Tip: You can go to the basic settings → Page 14 to
specify whether or not the time should be shown on
the display.
7 Basic operation
7.1 Switching on the appliance
Turn the function selector to any position other than
▶
the "Off" position .
a The appliance is switched on.
7.2 Switching off the appliance
Turn the function selector to the "Off" position .
▶
a The appliance is switched off.
Before using for the first time en
5.3 Other accessories
You can purchase other accessories from our after-
sales service, specialist retailers or online.
You will find a comprehensive range of products for
your appliance in our brochures and online:
www.siemens-home.bsh-group.com
Accessories vary from one appliance to another. When
purchasing accessories, always quote the exact
product number (E no.) of your appliance.
You can find out which accessories are available for
your appliance in our online shop or from our after-
sales service.
6.2 Cleaning the appliance before using it
for the first time
Clean the cooking compartment and accessories be-
fore using the appliance to prepare food for the first
time.
Remove any accessories and leftover packaging,
1.
such as polystyrene pellets, from the cooking com-
partment.
Before heating the appliance, wipe the smooth sur-
2.
faces in the cooking compartment with a soft, damp
cloth.
Keep the room ventilated while the appliance is
3.
heating.
Set the type of heating and temperature.
4.
→ "Basic operation", Page 9
Type of heat-
3D hot air
ing
Temperature
Maximum
Cooking time
1 hour
Switch off the appliance after the specified cooking
5.
time.
Wait until the cooking compartment has cooled
6.
down.
Clean the smooth surfaces with soapy water and a
7.
dish cloth.
Clean the accessories using soapy water and a dish
8.
cloth or soft brush.
7.3 Setting the type of heating and
temperature
1.
Use the function selector to set the type of heating.
Use the temperature selector to set the temperature
2.
or grill setting.
a The appliance starts heating after a few seconds.
When your food is ready, switch off the appliance.
3.
9