Siemens HB213AB 0 Series Kullanım Kılavuzu ve Kurulum Talimatları - Sayfa 10
Fırın Siemens HB213AB 0 Series için çevrimiçi göz atın veya pdf Kullanım Kılavuzu ve Kurulum Talimatları indirin. Siemens HB213AB 0 Series 28 sayfaları.
Sayfayı Yazdır
en Time-setting options
8.1 Setting rapid heating
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
Use the function selector to select rapid heating .
1.
Use the temperature selector to set the required
2.
temperature.
9 Time-setting options
Your appliance has different time-setting options, with
which you can control its operation.
9.1 Overview of the time-setting options
With the
button, select the different time-setting op-
tions.
Time-setting
Use
option
Timer
The timer can be set independently
of the appliance when it is in opera-
tion. It does not affect the appliance.
Cooking time
If you set a cooking time, operation
of the appliance stops automatically
once this time has elapsed.
End time
For the cooking time, you can set the
time at which operation ends. The
appliance starts up automatically so
that it finishes cooking at the re-
quired time.
Time
You can set the time.
9.2 Setting the timer
The timer runs independently of the appliance when it
is in operation. The timer can be set when the appli-
ance is switched on or off, up to 23 hours and 59
minutes. The timer has its own audible signal so that
you can tell whether it is the timer or a cooking time
which has elapsed.
Note: The timer and cooking time cannot count down
at the same time. If a cooking time has already been
set, you cannot set the timer.
Press the
button repeatedly until
1.
lighted in the display.
Use the
or
button to set the timer duration.
2.
Button
Default value
5 minutes
10 minutes
The timer duration can be set in 30-second incre-
ments up to 10 minutes. Above 10 minutes, the
time increments become longer the higher the
value.
a The timer starts and the timer duration begins to
count down after a few seconds.
a An audible signal sounds and the timer duration is
zero in the display when the timer duration has
elapsed.
Once the timer duration has elapsed:
3.
10
a Rapid heating starts after a few seconds.
a When the rapid heating process ends, an audible
signal sounds and the heating indicator goes out.
Use the function selector to set a suitable type of
3.
heating.
Place the food in the cooking compartment.
4.
‒
Changing the timer
You can change the timer duration at any time.
Requirement: is highlighted on the display.
Use the
▶
a The appliance applies the change after a few
seconds.
Cancelling the timer
You can cancel the timer duration at any time.
Requirement: is highlighted on the display.
Use the
▶
a After a few seconds, the appliance applies the
change and
9.3 Setting the cooking time
You can set a cooking time for operation of up to 23
hours 59 minutes.
Requirement: The type of heating and temperature or
setting are set.
Press the
1.
lighted in the display.
Use the
2.
Button
The cooking time can be set in 1-minute increments
up to 1 hour, and then in 5-minute increments.
a The appliance starts heating and the cooking time
counts down after a few seconds.
is high-
a If the cooking time has elapsed, an audible signal
sounds and the display shows the cooking time as
zero.
When the cooking time has elapsed:
3.
‒
‒
‒
Changing the cooking time
You can change the cooking time at any time.
Requirement:
Change the cooking time using the
▶
a The appliance applies the change after a few
seconds.
Press any button to switch off the timer.
or
button to change the timer duration.
button to reset the timer duration to zero.
goes out.
button repeatedly until
or
button to set the cooking time.
Default value
10 minutes
30 minutes
Press any button to end the audible signal before
it sounds.
To set a cooking time again, press the
When your food is ready, switch off the appli-
ance.
is highlighted on the display.
is high-
button.
or
button.