Siemens HB213AB 0 Series Kullanım Kılavuzu ve Kurulum Talimatları - Sayfa 8
Fırın Siemens HB213AB 0 Series için çevrimiçi göz atın veya pdf Kullanım Kılavuzu ve Kurulum Talimatları indirin. Siemens HB213AB 0 Series 28 sayfaları.
Sayfayı Yazdır
en Accessories
Accessories
Wire rack
Universal pan
5.1 Locking function
The locking function prevents the accessories from tilt-
ing when they are pulled out.
You can pull out the accessories approximately halfway
without them tipping. The accessories must be inserted
into the cooking compartment correctly for the tilt pro-
tection to work properly.
5.2 Sliding accessories into the cooking
compartment
Always slide accessories into the cooking compartment
correctly. This is the only way to ensure that accessor-
ies can be pulled out approximately halfway without tip-
ping.
Turn the accessories so that the notch
1.
rear and is facing downwards.
Insert accessories between the two guide rods for
2.
the shelf position.
Wire rack
Insert the wire rack with the open
side facing the appliance door and
the curved lip
Baking tray
Slide the tray, e.g. the universal pan,
E.g. univer-
in with the sloping edge
sal pan or
appliance door.
baking tray
Place the accessory at the shelf positions with the
3.
pull-out rails and pull out the pull-out rails.
8
is at the
facing downwards.
facing the
Use
¡ Cake tins
¡ Ovenproof dishes
¡ Cookware
¡ Meat, e.g. roasting joints or steak
¡ Frozen meals
¡ Moist cakes
¡ Baked items
¡ Bread
¡ Large roasts
¡ Frozen meals
¡ Catching dripping liquids, e.g. fat when
grilling food on the wire rack.
Wire rack
Position the accessory so that its
or baking
edge is behind the lug
tray
out rail.
Note: The pull-out rails lock in place when they are
fully pulled out. Gently push the pull-out rails back
into the cooking compartment.
Push the accessory all the way in, making sure that
4.
it does not touch the appliance door.
Note: Take any accessories that you will not be using
out of the cooking compartment while the appliance is
in operation.
Combining accessories
You can combine the wire rack with the universal pan
to catch any liquid that drips down.
Place the wire rack on the universal pan so that
1.
both spacers
are on the rear edge of the univer-
sal pan.
Insert the universal pan between the two guide rods
2.
for a shelf position. In so doing, the wire rack is on
top of the upper guide rod.
Wire rack
on univer-
sal pan
5.3 Other accessories
You can purchase other accessories from our after-
sales service, specialist retailers or online.
You will find a comprehensive range of products for
your appliance in our brochures and online:
siemens-home.bsh-group.com
on the pull-