Epson 835p - PowerLite XGA LCD Projector Ürün Bilgileri - Sayfa 13

Projektör Epson 835p - PowerLite XGA LCD Projector için çevrimiçi göz atın veya pdf Ürün Bilgileri indirin. Epson 835p - PowerLite XGA LCD Projector 21 sayfaları. Release of check tool for network projectors v1.00 for windows
Ayrıca Epson 835p - PowerLite XGA LCD Projector için: Kullanıcı Kılavuzu (42 sayfalar), Kullanım Kılavuzu (36 sayfalar), Hızlı Kurulum (4 sayfalar), Kullanım Kılavuzu (47 sayfalar), Ürün Destek Bülteni (30 sayfalar), Tamamlayıcı Kılavuz (1 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar), Kurulum Kılavuzu (19 sayfalar), Kullanıcı Kılavuzu (1 sayfalar), Teknik Özet (7 sayfalar), İşlev Kılavuzu (5 sayfalar), Ürün Destek Bülteni (25 sayfalar), Ürün Destek Bülteni (38 sayfalar), Ürün Destek Bülteni (12 sayfalar), Ürün Destek Bülteni (42 sayfalar), Ürün Destek Bülteni (22 sayfalar), Ürün Destek Bülteni (28 sayfalar), Ürün Destek Bülteni (41 sayfalar), Ürün Destek Bülteni (34 sayfalar), Ürün Destek Bülteni (38 sayfalar), Ürün Destek Bülteni (28 sayfalar), Ürün Destek Bülteni (15 sayfalar), Ürün Destek Bülteni (22 sayfalar), Şartname Sayfası (4 sayfalar)

Sayfayı Yazdır

Epson 835p - PowerLite XGA LCD Projector Ürün Bilgileri

Make sure

Easy connect mode

If not, use the

pointer button on the remote control to

highlight the checkbox next to

press

to select it.

Enter

5. Make sure the projector has a unique name, so you can

identify it when connecting to it from your computer.

If you need to rename it, highlight the

box then press

. The outline of the text box turns

Enter

yellow to indicate you are in input mode. Press the

pointer button up to select individual letters in

alphabetical order, or down to select letters in reverse order;

then press the

pointer button to the right to move to

the next character position. When you're done typing the

new name, press

Enter

Note: If you want to enter a blank space, use the space

character that comes before the capital letter A.

If you want to enter numbers, press the

remote control. The button lights up to indicate that the

numeric keypad mode is active. Press the

to exit numeric keypad mode.

6. If your network card supports an SSID or ESSID name,

highlight the

text box, press

ESSID

name. When you're done, press

ESSID is case-sensitive (if you enter the name in uppercase

on the projector, you must type it the same way on the

computer connecting to the projector).

7. If you want to create a password for remote access to the

projector, highlight the

checkbox, press

, and enter a password of up to 8

Enter

alphanumeric characters. When you're done, press

8. If you want to set up a security keyword so that only people

who are in the same room as the projector can access it,

turn

Projector keyword

connect to the projector, it displays a randomized four-digit

is selected, as shown above.

Easy connect mode

Projector name

button on the

Num

button again

Num

, and enter a

Enter

. Note that the

Enter

Password for WEB control

on. Then when you want to

number or "keyword" on the screen. When prompted by

NS Connection, you must enter the keyword on your

, then

computer to connect.

Note: The projector keyword changes each time you turn the

projector off and then on again, or remove and reinsert the

802.11g card. Check the keyword on the EasyMP Network

screen whenever you start EasyMP and enter that keyword on

text

your computer. You can't connect using a previous keyword.

It is recommended that the keyword setting is changed

periodically.

9. When you're done making these settings, highlight the

button at the top of the screen (you can either press the

button on the remote control or use the

to highlight it), then press

again and press

Network Screen.

Projecting Wirelessly

Once you've started EasyMP and set up your projector and

computer in either Ad Hoc mode or Access Point mode,

follow these steps to start NS Connection and project

wirelessly.

1. Make sure you've installed your 802.11g wireless card in

your projector.

2. Windows: Select

menu.

Macintosh OS X: Double-click the

icon in your Applications folder.

3. The first time you start NS Connection, you may see a

dialog box asking you to select your network. Select the IP

address for your computer's network card and click

Note: If you don't see your network adapter's IP address,

allow a minute for it to appear. If your access point or

AirPort base station uses DHCP (Distribute IP addresses

Enter

setting is enabled for AirPort), sometimes it takes a minute

for the server to pick up the IP address.

Once you've selected the IP address for your network adapter,

you won't see the Switch network dialog box when you start

10/04

Epson PowerLite 835p

. Highlight the

Enter

to return to the main EasyMP

Enter

from the Start

EMP NS Connection

Epson PowerLite 835p

Esc

pointer button

button