Cisco 7926G Yönetim Kılavuzu - Sayfa 7

IP Telefon Cisco 7926G için çevrimiçi göz atın veya pdf Yönetim Kılavuzu indirin. Cisco 7926G 14 sayfaları. Wavelink avalanche management console
Ayrıca Cisco 7926G için: Sürüm Notları (16 sayfalar), Aksesuar Kılavuzu (20 sayfalar), Yönetim Kılavuzu (19 sayfalar), Kullanıcı Kılavuzu (10 sayfalar), Kullanıcı Kılavuzu (16 sayfalar), Yönetim Kılavuzu (23 sayfalar), Kurulum Kılavuzu (12 sayfalar), Kurulum Kılavuzu (21 sayfalar)

Wavelink Avalanche Server

Item

WLAN Settings

SSID

WLAN Mode

Call Power Save

Mode

WLAN Security

Description

Assigns the Service Set Identifier (SSID) to this

profile. You must assign the same SSID to the

phone that is also assigned to access points in the

wireless network.

Determines the signal mode or priority for

selecting signal modes available in the WLAN.

Options are:

• 802.11 b/g: Use only 2.4 GHz band

• 802.11a: Use only 5 GHz band

• Auto, 802.11b/g preferred over 802.11a

(dual-band)

• Auto, 802.11a preferred over 802.11b/g

(dual-band)

The preferred band, if available, is used

Note

at power-on, but the phone may switch

to the less-preferred 2.4 GHz band, if

available, and the preferred band is lost.

After the phone has connected to the

less-preferred band, it does not scan for

the preferred band if the current band is

acceptable, and will remain connected

to the less-preferred band.

• Auto, signal strength (RSSI): Use strongest

signal in dual-band environment

Set for the type of power saving mode used in the

WLAN. Options are:

• U-APSD/PS-Poll

• None

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide

Profile Settings Fields

For more information, see ...

802.11 Standards for WLAN

Communications

802.11 Standards for WLAN

Communications