Cisco 7931G - Unified IP Phone VoIP Yönetim Kılavuzu - Sayfa 3

IP Telefon Cisco 7931G - Unified IP Phone VoIP için çevrimiçi göz atın veya pdf Yönetim Kılavuzu indirin. Cisco 7931G - Unified IP Phone VoIP 12 sayfaları. For cisco unified callmanager express 4.0
Ayrıca Cisco 7931G - Unified IP Phone VoIP için: Kullanıcı Kılavuzu (20 sayfalar), Yönetim Kılavuzu (10 sayfalar), Yönetim Kılavuzu (17 sayfalar), Yönetim Kılavuzu (20 sayfalar), Kurulum Talimatları (4 sayfalar), Manuel (30 sayfalar), Hızlı Referans (2 sayfalar), Hızlı Referans Kartı (2 sayfalar), Kullanıcı Kılavuzu (15 sayfalar)

Cisco Unified IP Phone Installation

Network and Access Ports

The back of the Cisco Unified IP Phone includes these ports:

• Network port: Labeled 10/100 SW

• Access port: Labeled 10/100 PC

Each port supports 10/100 Mbps half- or full-duplex connections to external devices. You can use either

Category 3 or 5 cabling for 10-Mbps connections, but you must use Category 5 for 100 connections.

Use the SW network port to connect the phone to the network. You must use a straight-through cable on this

port. The phone can also obtain inline power from a switch over this connection. For details, see

IP Phone

Use the PC access port to connect a network device, such as a computer, to the phone. You must use a

straight-through cable on this port.

Handset

The handset is designed especially for use with the Cisco Unified IP Phone 7931G. It includes a light strip

that indicates incoming calls and voice messages waiting.

To connect a handset to the Cisco Unified IP Phone, plug the cable into the handset and the Handset port on

the back of the phone.

Note

The handset does not support wideband audio.

Speakerphone

By default, the speakerphone is enabled on the Cisco Unified IP Phone.

To disable the speakerphone using Cisco Unified CM Administration, perform the following procedure:

Procedure

Step 1

Choose Device > Phone and locate the phone you want to modify.

Step 2

In the Phone Configuration window, check Disable Speakerphone.

Step 3

Click Apply.

Power.

Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

Network and Access Ports

Cisco Unified