Siemens SP Series Kullanım Kılavuzu - Sayfa 31

Bulaşık Makinesi Siemens SP Series için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Siemens SP Series 42 sayfaları.

Sayfayı Yazdır

Fault

Detergent residue.

Water stains on plastic

parts.

Washable or water-soluble

coatings in the container or

on the door.

Cause

Detergent dispenser cover

blocked by utensils and therefore

does not open fully.

Detergent dispenser cover

blocked by the tablet.

Tablets used in the quick or short

programme.

Dissolving time of the detergent

is not reached in the selected

short programme.

Washing effect and dissolving

performance are reduced after a

prolonged storage time or

detergent is very lumpy.

Droplet formation on plastic

surface is physically unavoidable.

After drying, water stains are

visible.

Detergent substances are

deposited. These coatings cannot

usually be removed with

chemicals (appliance cleaner, ...).

If there is a "white coating" on the

container floor, the water

softening system has been set

marginally.

Salt dispenser cover 1J not

closed.

Only for glasses: Initial glass

corrosion – can only apparently

be wiped off.

Fault, what to do?

Remedial action

Detergent dispenser cover must not be

obstructed by utensils.

Do not place utensils or fragrance dispenser

in the tablet collecting tray.

Tablet must be inserted flat and not upright.

Dissolving time of tablets too long for a

quick or short programme.

Use a detergent powder or select a more

intensive programme.

Change detergent.

Use a more intensive programme (more

water changes).

Arrange utensils in a sloping position.

Use rinse aid.

If required, increase softening setting.

Change detergent brand.

Clean appliance mechanically.

Increase softening setting and change

detergent if required.

Close salt dispenser cover correctly.

See "Glass and utensil damage".