Cisco 7961G - IP Phone VoIP Yönetim Kılavuzu - Sayfa 15

IP Telefon Cisco 7961G - IP Phone VoIP için çevrimiçi göz atın veya pdf Yönetim Kılavuzu indirin. Cisco 7961G - IP Phone VoIP 16 sayfaları. Unified communications manager 9.0 (sccp and sip)
Ayrıca Cisco 7961G - IP Phone VoIP için: Kullanıcı Kılavuzu (21 sayfalar), Kullanıcı Kılavuzu (25 sayfalar), Hızlı Referans (2 sayfalar), Kullanıcı Kılavuzu (4 sayfalar), Veri Sayfası (8 sayfalar), Kullanıcı Kılavuzu (4 sayfalar), Kullanıcı Kılavuzu (13 sayfalar), Yönetim Kılavuzu (12 sayfalar), Kullanıcı Kılavuzu (13 sayfalar), Telefon Kılavuzu (30 sayfalar), Kullanıcı Kılavuzu (13 sayfalar), Manuel (12 sayfalar), Kullanıcı Kılavuzu (6 sayfalar)

Sayfayı Yazdır
Cisco 7961G - IP Phone VoIP Yönetim Kılavuzu
Cisco Unified IP Phones Installation
If the phone successfully passes through these stages, it has started up properly. If the phone does not start
up properly, see

Network Settings

If you are not using DHCP in your network, you must configure these network settings on the
Cisco Unified IP Phone after installing the phone on the network:
• IP address
• IP subnet information (subnet mask for IPv4 and subnet prefix length for IPv6)
• Default gateway IP address
• TFTP server IP address
• You also may configure the domain name and the DNS server settings, if necessary.
Cisco Unified IP Phone

Cisco Unified IP Phone Security

The security features protect against several threats, including threats to the identity of the phone and to data.
These features establish and maintain authenticated communication streams between the phone and the
Cisco Unified Communications Manager server, and digitally sign files before they are delivered.
For more information about the security features, see Cisco Unified Communications Manager Security Guide.
Related Topics
Cisco Unified IP Phone Security Features
Install Locally Significant Certificate
You can initiate the installation of a Locally Significant Certificate (LSC) from the Security Configuration
menu on the phone. This menu also lets you update or remove an LSC.
If you use a Third Party CA to sign LSCs, note that the Cisco Unified IP Phone 7900 Series only support
SHA-1 as the algorithm to sign certificates. The phones do not support SHA-2 (SHA256). For more information
on the use of a Third Party CA to sign LSCs, see CUCM Third-Party CA-Signed LSCs Generation and Import
Configuration Example in
unified-communications-manager-callmanager/118779-configure-cucm-00.html.
Before You Begin
Make sure that the appropriate Cisco Unified Communications Manager and the Certificate Authority Proxy
Function (CAPF) security configurations are complete:
• The CTL file or ITL file should have a CAPF certificate.
• Additional directory numbers and speed dial numbers, if configured
• Softkeys
Startup
Problems.
Settings.
https://www.cisco.com/c/en/us/support/docs/unified-communications/
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
Network Settings
15