Cisco Aironet 521 Hızlı Başlangıç Kılavuzu - Sayfa 20
IP Telefon Cisco Aironet 521 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cisco Aironet 521 26 sayfaları. Ip phones with multiplatform firmware
Ayrıca Cisco Aironet 521 için: Manuel (35 sayfalar), Kullanıcı Kılavuzu (46 sayfalar), Manuel (40 sayfalar), Yönetim Kılavuzu (48 sayfalar), Kurulum Kılavuzu (39 sayfalar), Manuel (24 sayfalar)
Sayfayı Yazdır
a521qsg.fmb Page 18 Monday, March 12, 2007 10:40 AM
D R A F T - C I S C O C O N F I D E N T I A L
Resetting to Default Configuration
If you forget your password that allows you to configure the access point, you
may need to completely reset the configuration. You can use the MODE
button on the access point to reset the configuration.
These steps reset all configuration settings to factory defaults,
Note
including passwords, WEP keys, the IP address, and the SSID.
Using the MODE Button
Follow these steps to delete the current configuration and return all access
point settings to the factory defaults by using the MODE button:
1. Open the access point cover (refer to the "How to Open the Top Cover"
section on page 2).
2. Disconnect power from the access point (the power jack for external
power or the Ethernet cable for in-line power).
3. Press and hold the MODE button while you reconnect power to the
access point.
4. Continue pressing the MODE button until the Ethernet LED turns
amber. (approximately 2 to 3 seconds). Then release the button.
18
78-18092-01