Cisco Cisco 7960 Kullanıcı Kılavuzu - Sayfa 5

Adjusting the Handset, Speakerphone, or Headset Volume

Adjust the volume on the handset, speakerphone, or headset by performing the following steps.

Step 1:

Increase the volume of your handset, headset, or speakerphone by pressing the + on

the VOLUME button.

Step 2:

Decrease the volume of your handset, headset, or speakerphone by pressing the - on

the VOLUME button.

The VOLUME button adjusts the volume for the currently active voice receiver.

Customizing Phone Settings

You can change various settings on your Cisco IP Phone 7940/7960 to ensure that the ringer

volume, ring sound, and LCD contrast are set appropriately for you. These sections describe the

changes you can make:

• Changing the LCD Contrast, page 5

• Adjusting the Ringer Volume, page 6

• Changing the Ringer Sound, page 6

Changing the LCD Contrast

Perform the following steps to improve the readability of the LCD screen by changing the display

contrast.

Step 1:

Press the settings button.

Step 2:

Press the Scroll button to highlight Contrast from the Settings menu.

Step 3:

Press the Down or Up softkeys to set the desired contrast on the LCD screen.

Step 4:

Press the OK softkey to accept your changes.

Step 5:

Press the Back softkey to exit the Settings menu.

Step 6:

Press the Back softkey to display the main LCD screen.

Hostcomm Hosted Telephony

Using the Cisco IP Phone 7940/7960

User Guide