Cisco Expansion Module 7914 Telefon Kılavuzu - Sayfa 10
IP Telefon Cisco Expansion Module 7914 için çevrimiçi göz atın veya pdf Telefon Kılavuzu indirin. Cisco Expansion Module 7914 33 sayfaları. Expansion module cme
Ayrıca Cisco Expansion Module 7914 için: Sistem Kılavuzu (50 sayfalar), Sistem Kılavuzu (36 sayfalar), Manuel (33 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)
Position the phone so that the front of the phone is
Step 1
facing up.
Line up the two open slots on the bottom of the
Step 2
Expansion Module 7914 with the two hooks on the
support bar.
Insert the hooks into the slots and then rotate the top
Step 3
of the Expansion Module 7914 into the support bar so
that it rests flush with the bar.
Tighten the thumbscrew on the back of the
Step 4
Expansion Module 7914.
Note
Connect the Interface Cable
Refer to the following table, which depicts the "in" and "out"
icons on the AUX jacks, and to Figure 5 and the steps that
follow.
In icon
On your Cisco IP Phone or Expansion Module 7914,
Note
the AUX jack may be labelled RS-232. In this case read
"RS-232 jack" for AUX jack in Figure 5 and Steps 1 –
4 in this section.
10
If you are installing two Expansion Modules,
repeat Steps 2, 3, and 4 for the second
Expansion Module.
Out icon