Ricoh J2SS Teknik Bülten - Sayfa 12
Yazıcı Ricoh J2SS için çevrimiçi göz atın veya pdf Teknik Bülten indirin. Ricoh J2SS 17 sayfaları.
Sayfayı Yazdır
Model:
J2SS II
Subject:
Copy Tray Type 760S Introduction
From:
GTS and S Field Information Dept.
Classification:
Copy Tray Type 760S (A836-11) has been introduced as an additional option for the J2SS
II multiple version copier (A252). Copy Tray Type 760 (A836-10) has already been
launched. So, there are now two copy trays that can be installed on the A252 copier.
Differences between Type 760 and Type 760S
1. Type 760S requires less space for installation than Type 760 (A836-10).
The space required at the rear side of the copier is as follows:
Type 760:
Type 760S: 180 mm
2. When paper longer than A0/E size (1200 mm) is stacked on a Type 760S tray, a part
of the paper may touch the floor because of its more compact size.
Installation Procedure
The following shows the different steps from the Type 760.
a) Accessories and Step #7
The following parts are not necessary, so they are not accessories and Step 7 of the
procedure is not required.
Rear Copy Tray Sheet – Short [B].............................................. 2
Rear Copy Tray Sheet – Center [A].............................................1
T
echnical
Troubleshooting
Mechanical
Paper path
Other (New product informaiton)
589 mm
[B]
B
ulletin
Date:
15-Oct-98
Prepared by:
Part information
Electrical
Transmit/receive
[B]
[A]
PAGE: 1/2
No.:
8
H. Kobayashi
Action required
Service manual revision
Retrofit information
[A]