Ricoh Pro C9200 Kullanım Talimatları Kılavuzu - Sayfa 13
Yazıcı Ricoh Pro C9200 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Ricoh Pro C9200 24 sayfaları. Using the auto color diagnosis function
Ayrıca Ricoh Pro C9200 için: Kullanım Talimatları Kılavuzu (48 sayfalar), İpuçları (49 sayfalar), Cip Eğitimi (16 sayfalar), Manuel (32 sayfalar)
Sayfayı Yazdır
Printing with Auto Color Diagnosis
To print with Auto Color Diagnosis, it is necessary to use paper for which the paper properties have
been generated. For this purpose, specify the paper catalog in the Job Properties window of Fiery
Command WorkStation.
1.
On Fiery Command Workstation, display Job Properties.
2.
Select [Media], and then register in "Paper Catalog" the paper catalog for which the
paper properties have been generated.
3.
Select [Color], and then set Output profile to [Use job defined settings].
If you print with an Output profile setting other than [Use job defined settings], the hue of the
printed image may vary excessively.
• To change Output profile, generate the paper properties again after changing the profile in the
paper catalog.
• To turn Auto Color Diagnosis off, set [Auto Color Diagnosis] to [Inactive] in [Auto Color Diagnosis
Unit Setting] on the [Administrator Tools] tab in [System Settings] on the machine control panel, and
then reboot the machine.
Printing Diagnostic Marks
You can print groups of color patches called diagnostic marks aligned parallel to the feeding direction
in the left and right margins of the paper when all of the conditions listed below are fulfilled. Diagnostic
marks aid the Auto Color Diagnosis function when the number of colors contained on the printed page is
insufficient.
• The length of the paper is longer than 420 mm (16.6 inches), and the width is wider than 100 mm
(4.0 inches)
Generating Paper Properties (When Using Fiery)
M0B2WC0015
11