Ricoh Pro C9200 Інструкція з експлуатації Посібник з експлуатації - Сторінка 13

Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Принтер Ricoh Pro C9200. Ricoh Pro C9200 24 сторінки. Using the auto color diagnosis function
Також для Ricoh Pro C9200: Інструкція з експлуатації Посібник з експлуатації (48 сторінок), Поради (49 сторінок), Тренінг Cip (16 сторінок), Посібник (32 сторінок)

Printing with Auto Color Diagnosis

To print with Auto Color Diagnosis, it is necessary to use paper for which the paper properties have

been generated. For this purpose, specify the paper catalog in the Job Properties window of Fiery

Command WorkStation.

On Fiery Command Workstation, display Job Properties.

Select [Media], and then register in "Paper Catalog" the paper catalog for which the

paper properties have been generated.

Select [Color], and then set Output profile to [Use job defined settings].

If you print with an Output profile setting other than [Use job defined settings], the hue of the

printed image may vary excessively.

• To change Output profile, generate the paper properties again after changing the profile in the

paper catalog.

• To turn Auto Color Diagnosis off, set [Auto Color Diagnosis] to [Inactive] in [Auto Color Diagnosis

Unit Setting] on the [Administrator Tools] tab in [System Settings] on the machine control panel, and

then reboot the machine.

You can print groups of color patches called diagnostic marks aligned parallel to the feeding direction

in the left and right margins of the paper when all of the conditions listed below are fulfilled. Diagnostic

marks aid the Auto Color Diagnosis function when the number of colors contained on the printed page is

insufficient.

• The length of the paper is longer than 420 mm (16.6 inches), and the width is wider than 100 mm

(4.0 inches)

Generating Paper Properties (When Using Fiery)

M0B2WC0015