Ricoh SP 311DNW Başlangıç Kılavuzu - Sayfa 20
Yazıcı Ricoh SP 311DNW için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Ricoh SP 311DNW 45 sayfaları. Network settings guide
Ayrıca Ricoh SP 311DNW için: Hızlı Kurulum Kılavuzu (2 sayfalar), Teknik Özellikler (4 sayfalar), Kurulum Kılavuzu (2 sayfalar)
Appendix
A
Smart Organizing Monitor utility. Note that you can also confirm connection status using
Image
Monitor.
Before proceeding, please check the following:
Printer power switch is On.
•
You have successfully completed Steps 1-4.
•
To check connection status, proceed as follows:
1. Click [Start]
2. Wait a moment, as software checks for a connection. If the
connection is successful, the displays reads, Ready (or Energy Saver
Mode 2). If the connection failed, the display reads, No Response
from I/O Device.
Succeeded
Note:
To connect manually, e.g., the printer is
•
networked via an Ethernet cable, click [Connect Printer], click
drop-down menu [], and select [Connect Printer]. Enter
printer's IP
search for the printer, click [Search Network Printer].
3. Click [X] to close Smart Organizing Monitor.
Check Connection Status
You can confirm that the connection to your printer is working properly using the
[Smart Organizing Monitor Status].
address, and click [OK]. To perform an automatic
RICOH SP 311DNw B&W Network Laser Printer
Failed
Getting Started Guide
Web
20