Epson EMP 810 Ağ Kurulum Kılavuzu - Sayfa 7

Projektör Epson EMP 810 için çevrimiçi göz atın veya pdf Ağ Kurulum Kılavuzu indirin. Epson EMP 810 37 sayfaları. Esc/vp21 command user's guide for business projectors
Ayrıca Epson EMP 810 için: Hızlı Referans Kılavuzu (17 sayfalar), Kullanıcı Kılavuzu (24 sayfalar), Teknik Özellikler (1 sayfalar), Kullanıcı Kılavuzu (28 sayfalar)

Sayfayı Yazdır

8. When you see a screen like this one, verify that the settings are correct. If you

need to change a setting, press

change.

9. Once you have verified that your network settings are correct, press

the settings and return to the Network Settings menu.

10. Press the

Home

11. Wait for the printer to connect to your wireless network (this can take up to

90 seconds).

Once it's connected, you see the

on the printer's control panel.

12. Continue with "Install Software" on page 22.

Note:

If the printer doesn't connect to your wireless network after 90 seconds, the WEP key

or WPA passphrase may have been entered incorrectly. See "Connect Wirelessly Using

the Setup Wizard" on page 4 to select your network settings again.

If the printer still doesn't connect to your wireless network, see "The printer cannot

find or connect to the wireless router or access point" on page 29.

Back

button to exit the Network Settings menu.

until you see the setting you need to

WiFi icon and a signal strength indicator

Wireless connection

established

Wireless Network Installation

to save