Cisco NCS 6008 Ambalajdan Çıkarma, Taşıma ve Emniyete Alma Kılavuzu - Sayfa 38
Ağ Yönlendiricisi Cisco NCS 6008 için çevrimiçi göz atın veya pdf Ambalajdan Çıkarma, Taşıma ve Emniyete Alma Kılavuzu indirin. Cisco NCS 6008 44 sayfaları. 6000 series network convergence system routers unpacking, moving, and securing guide
Ayrıca Cisco NCS 6008 için: Manuel (12 sayfalar)
Sayfayı Yazdır
Verifying the Move Path
Allow a minimum gap of between 4 to 6 inches (10 to 15 cm) on each side of the combined chassis and
Note
dolly when moving it.
Figure 3-1
180-degree configuration.
Figure 3-1
1
1
Width (on dolly, 180-degree position) 44 in.
(112 cm)
2
Depth (on dolly, 180-degree position) 48 in.
(122 cm)
3
Turn radius (on dolly, 180-degree position)
33 in. (83 cm)
Table 3-2
and 180-degree dolly configuration.
Table 3-2
Dolly Configuration
90-degree dolly position
180-degree dolly position
*Aisle width may be different when transporting the chassis around a corner.
Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide
3-4
shows the recommended minimum space to turn the chassis on the dolly in its 90-degree and
Recommended Turning Diameter of Dolly
180-degree configuration
Dolly 180-degree
3
Cisco NCS 6008
Chassis
Dolly 180-degree
provides the dolly width and the recommended aisle width turning radius for the 90-degree
Chassis Turning Recommendations
90-degree configuration
6
2
4
4
Width (on dolly, 90-degree position) 24 in.
(60 cm)
5
Depth (on dolly, 90-degree position) 70 in.
(178 cm)
6
Turn radius (on dolly, 90-degree position)
37 in. (94 cm)
Width of Dolly
Recommended Aisle Width
24 in. (60 cm)
32 in. (81 cm)*
44 in. (112 cm)
52 in. (132 cm)
Dolly
90-degree
Cisco NCS 6008
Chassis
Dolly
90-degree
Chapter 3
5
OL-29233-01