Cisco NCS 6008 포장 풀기, 이동 및 고정 매뉴얼 - 페이지 38
{카테고리_이름} Cisco NCS 6008에 대한 포장 풀기, 이동 및 고정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco NCS 6008 44 페이지. 6000 series network convergence system routers unpacking, moving, and securing guide
Cisco NCS 6008에 대해서도 마찬가지입니다: 매뉴얼 (12 페이지)
페이지 인쇄
Verifying the Move Path
Allow a minimum gap of between 4 to 6 inches (10 to 15 cm) on each side of the combined chassis and
Note
dolly when moving it.
Figure 3-1
180-degree configuration.
Figure 3-1
1
1
Width (on dolly, 180-degree position) 44 in.
(112 cm)
2
Depth (on dolly, 180-degree position) 48 in.
(122 cm)
3
Turn radius (on dolly, 180-degree position)
33 in. (83 cm)
Table 3-2
and 180-degree dolly configuration.
Table 3-2
Dolly Configuration
90-degree dolly position
180-degree dolly position
*Aisle width may be different when transporting the chassis around a corner.
Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide
3-4
shows the recommended minimum space to turn the chassis on the dolly in its 90-degree and
Recommended Turning Diameter of Dolly
180-degree configuration
Dolly 180-degree
3
Cisco NCS 6008
Chassis
Dolly 180-degree
provides the dolly width and the recommended aisle width turning radius for the 90-degree
Chassis Turning Recommendations
90-degree configuration
6
2
4
4
Width (on dolly, 90-degree position) 24 in.
(60 cm)
5
Depth (on dolly, 90-degree position) 70 in.
(178 cm)
6
Turn radius (on dolly, 90-degree position)
37 in. (94 cm)
Width of Dolly
Recommended Aisle Width
24 in. (60 cm)
32 in. (81 cm)*
44 in. (112 cm)
52 in. (132 cm)
Dolly
90-degree
Cisco NCS 6008
Chassis
Dolly
90-degree
Chapter 3
5
OL-29233-01