DigitaLinx DL-HD2100 Kullanıcı El Kitabı - Sayfa 5
Genişletici DigitaLinx DL-HD2100 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. DigitaLinx DL-HD2100 17 sayfaları. Hdbaset extender set
Ayrıca DigitaLinx DL-HD2100 için: Hızlı Kurulum Kılavuzu (8 sayfalar), Hızlı Kurulum Kılavuzu (8 sayfalar)
Sayfayı Yazdır
Transmitter / Front and Back View
1. FRONT PANEL DIAGNOSTIC LEDs;
• POWER -Solid, the DL-HD2100 extender is receiving power from the power supply or from the
remote extender via Category 6 cabling.
• STATUS - Flashes once per second, the HDBaseT processor is running.
• HDCP - Solid, HDCP signal is present in the HDMI stream. Flashes quickly, non-encrypted HDCP signal
is present in the HDMI stream.
• LINK - Solid, the two DL-HD2100 components are communicating via Category cabling.
2. DC 12V
• Locking power port, connect DC12V power adapter to transmitter (either power port on transmitter
and receiver can power entire set)
3. HDBT OUT
• RJ45 HDBaseT connection. Connect Cat6 cable to receiver
4. IR In / IR OUT
• 3.5mm IR input port for connection to IR receiver or IR system
• 3.5mm IR output port for connection to IR emitter
5. AUDIO OUT
• Analog audio de-embedding port for routing stereo audio to audio amplifier / mixer
6. RS232
• 3 pin Phoenix connector port for connecting / passing RS232 control to receiver / display location
7. HDMI In
• HDMI input port for connections to video sources
8. Ethernet
• RJ45 port for passing Ethernet to receiver / display location
9. TOSLINK OUT
• Digital audio return channel output port for routing multi-channel from DL-HD2100 receiver to
audio amplifier or mixer
Front and Rear Panels
1
2
3
4
5
6
7
8
DL-HD2100 Owners Manual
9
5