DigitaLinx DL-HD2100 Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DigitaLinx DL-HD2100. DigitaLinx DL-HD2100 17 pagina's. Hdbaset extender set
Ook voor DigitaLinx DL-HD2100: Handleiding voor snelle installatie (8 pagina's), Handleiding voor snelle installatie (8 pagina's)

1. FRONT PANEL DIAGNOSTIC LEDs;

• POWER -Solid, the DL-HD2100 extender is receiving power from the power supply or from the

remote extender via Category 6 cabling.

• STATUS - Flashes once per second, the HDBaseT processor is running.

• HDCP - Solid, HDCP signal is present in the HDMI stream. Flashes quickly, non-encrypted HDCP signal

is present in the HDMI stream.

• LINK - Solid, the two DL-HD2100 components are communicating via Category cabling.

2. DC 12V

• Locking power port, connect DC12V power adapter to transmitter (either power port on transmitter

and receiver can power entire set)

3. HDBT OUT

• RJ45 HDBaseT connection. Connect Cat6 cable to receiver

4. IR In / IR OUT

• 3.5mm IR input port for connection to IR receiver or IR system

• 3.5mm IR output port for connection to IR emitter

5. AUDIO OUT

• Analog audio de-embedding port for routing stereo audio to audio amplifier / mixer

6. RS232

• 3 pin Phoenix connector port for connecting / passing RS232 control to receiver / display location

7. HDMI In

• HDMI input port for connections to video sources

8. Ethernet

• RJ45 port for passing Ethernet to receiver / display location

9. TOSLINK OUT

• Digital audio return channel output port for routing multi-channel from DL-HD2100 receiver to

audio amplifier or mixer

Front and Rear Panels

DL-HD2100 Owners Manual