Cisco Catalyst IW6300H-AC Kurulum Kılavuzu
Kablosuz Erişim Noktası Cisco Catalyst IW6300H-AC için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Cisco Catalyst IW6300H-AC 28 sayfaları.
Installing the Access Point
This chapter describes how to install the access point.
•
•
•
•
•
•
•
Mounting on a Wall or a Pole
This section provides instructions for the physical installation of your access points. Personnel installing the
access point must understand wireless access points and bridging techniques and grounding methods.
Caution
All installation methods for mounting an access point on any wall surface is subject to the acceptance of local
jurisdiction.
Installation Option
The Cisco Catalyst IW6300 Heavy Duty Series Access Points are installed using the pole mount installation
kit (IOT-ACCPMK), which is used for pole or wall installations.
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement
1030
Warning
Installation of the equipment must comply with local and national electrical codes. Statement 1074
Refer to these sections for installation details:
Mounting on a Wall or a Pole, on page 1
Working with the Access Cover, on page 13
Installing External Antennas, on page 15
Grounding the Access Point , on page 19
Using the Reset Button, on page 20
Powering the Access Point, on page 20
Performing Maintenance, on page 27
Installing the Access Point
1