Epson EcoTank M2140 Buradan başlayın - Sayfa 2

Hepsi Bir Arada Yazıcı Epson EcoTank M2140 için çevrimiçi göz atın veya pdf Buradan başlayın indirin. Epson EcoTank M2140 4 sayfaları.

Sayfayı Yazdır

When the ink tank is full, remove the ink bottle and

securely close the ink tank cap.

Note:

Do not leave the ink bottle inserted; otherwise the bottle

may be damaged or ink may leak.

Securely close the ink bottle with the bottle cap.

Close the ink tank cover.

Connect the power cord to the back of the product and to

an electrical outlet.

Caution:

Do not connect to your computer yet.

Press the

power button to turn on the product, then

wait for the

power light to stop flashing.

Note:

If an error code appears, turn off the product and check

that no protective material has been left inside the product.

Press

to select your language on the LCD screen,

then press the OK button.

Note:

You can change this setting later using the product's

control panel. For more information, see the online User's Guide.

When the message to see the Start Here sheet appears

on the LCD screen, press and hold the

5 seconds.

When the ink confirmation message appears on the LCD

screen, press the

start button to start charging the ink.

Ink charging takes approximately 10 minutes. A message

appears when ink charging is complete. Press the OK

button to continue.

Caution:

Do not turn off the product, raise the printer cover, or

load paper while the product is charging or you'll waste ink.

Note:

After some ink is used for charging, the rest is available

for printing.

Follow the on-screen instructions to adjust the print

quality. Press the OK button to continue.

Load paper

See the online User's Guide for information about loading

capacity and available paper types and sizes.

Make sure the product is done charging the ink. Open the

paper cassette cover and pull out the paper cassette until

it stops.

Slide the edge guides all the way out.

help button for