Epson EcoTank M2140 Почніть звідси. - Сторінка 2

Переглянути онлайн або завантажити pdf Почніть звідси. для Принтер "Все в одному Epson EcoTank M2140. Epson EcoTank M2140 4 сторінки.

Друкувати сторінку
5
When the ink tank is full, remove the ink bottle and
securely close the ink tank cap.
Note:
Do not leave the ink bottle inserted; otherwise the bottle
may be damaged or ink may leak.
6
Securely close the ink bottle with the bottle cap.
7
Close the ink tank cover.
8
Connect the power cord to the back of the product and to
an electrical outlet.
Caution:
Do not connect to your computer yet.
9
Press the
power button to turn on the product, then
wait for the
power light to stop flashing.
Note:
If an error code appears, turn off the product and check
that no protective material has been left inside the product.
10
Press
or
to select your language on the LCD screen,
then press the OK button.
Note:
You can change this setting later using the product's
control panel. For more information, see the online User's Guide.
11
When the message to see the Start Here sheet appears
on the LCD screen, press and hold the
5 seconds.
12
When the ink confirmation message appears on the LCD
screen, press the
start button to start charging the ink.
Ink charging takes approximately 10 minutes. A message
appears when ink charging is complete. Press the OK
button to continue.
Caution:
Do not turn off the product, raise the printer cover, or
load paper while the product is charging or you'll waste ink.
Note:
After some ink is used for charging, the rest is available
for printing.
13
Follow the on-screen instructions to adjust the print
quality. Press the OK button to continue.
3

Load paper

See the online User's Guide for information about loading
capacity and available paper types and sizes.
1
Make sure the product is done charging the ink. Open the
paper cassette cover and pull out the paper cassette until
it stops.
2
Slide the edge guides all the way out.
help button for