Argo ASIBS9DC Kullanım Talimatları Kılavuzu - Sayfa 9

Klima Argo ASIBS9DC için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Argo ASIBS9DC 17 sayfaları.

Sayfayı Yazdır

ADJUSTING THE AIR FLOW DIRECTION

You can adjust the air flow direction using the 4 flaps of

the grille frame. Chose the best position according to the

operation mode and the recommended flap position.

HOW TO ADJUST THE FLAP DIRECTION

Press the FLAP button to select the flap function.

Fixed:

six

oscillations

position

FLAPS

Zone «A» for cooling

and dehumidifyng

Zone «B»

for heating

Continous

Automatical

oscillations

The flap automatically closes when the unit

NOTES

is off.

If automatical oscillation is selected, when

the unit starts in heating operation, the fan

stops and the flap is in fixed position until

the air being blown out of the unit begins to

warm. Once the air warms up, the flap

position and fan speed change to the settings

specified with the remote control.

CAUTION

Do not move the flap with your hands when the air

conditioner is running.

CAUTION

• Use the FLAP button on the remote control to adjust

the position of the flap. If you move the flap by hand,

the factual flap position and the flap position on the

remote control may no longer match. If this should

happen, shut off the unit, wait for the flap to close,

and then turn on the unit again; the flap position will

now be normal again.

• Do not have the flap pointed down during cooling

operation. Condensation may begin to form around the

air vent and drip down.

OPERATION WITHOUT THE REMOTE

CONTROL UNIT

If you have lost the remote control unit or it has troubles,

follow the steps below.

1. WHEN THE AIR CONDITIONER IS STOPPED

If you want to turn on the air conditioner push the

OPERATION selector with a pen to select the desired mode

(COOL or HEAT).

NOTE

The air conditioner will start in HIGH fan speed.

The temperature setting is 25°C for cooling mode and

21°C for heating mode.

2. WHEN THE AIR CONDITIONER IS RUNNING

If you want to turn of f the air conditioner push the

OPERATION selector with a pen until the OPERA TION

lamp is turned off.

Operation

button

POWER FAILURE DURING OPERATION

In the event of power failure, the unit will stop. When the

power is resumed, the unit will restart automatically after 3

minutes.

MODELS

ASIAS8

ASIBS9

MODELS

ASICS10

ASIDS13