Cisco MCS 7800 Series Ürün Yazılımı Geçişi Ana Kılavuzu - Sayfa 10

Konferans Sistemi Cisco MCS 7800 Series için çevrimiçi göz atın veya pdf Ürün Yazılımı Geçişi Ana Kılavuzu indirin. Cisco MCS 7800 Series 31 sayfaları. Multiplatform phones
Ayrıca Cisco MCS 7800 Series için: Hızlı Başlangıç Kılavuzu (12 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Son Kullanıcı Kılavuzu (6 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Referans (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Manuel (43 sayfalar), Manuel (4 sayfalar), Başlayın (6 sayfalar), Kurulum Kılavuzu (39 sayfalar), Manuel (20 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)

Conversion Direction

Upload your license file that you received from Cisco onto the Unified CM.

Cisco, see the Appendix.

Download the license file to your computer.

Access https://CUCM-ip-address/cmplatform/, where CUCM-ip-address is the IP address of the Unified CM.

Navigate to Software Upgrades -> TFTP File Management -> Upload file.

Select the license file and upload the file.

Restart the TFTP Service on the Unified CM

Go to Device -> Phone.

In the "Find Phone where" field, select CONTAINS and enter the MAC address of your 78xx or 88xx phone and click Find.

Scroll down to Phone Load and enter the phone load. For example, enter sip78xx.TLexE2M-11-2-3C-12.loads.

Click Save, Apply Config, and OK.

10. Refresh your browser page and ensure that the Download Status says "Upgrading". The phone should reboot momentarily.

Important! Your phone must run 12.5(1) or later or it will not upgrade to the transitional load.

Model

7811/21/41/61

7832

Enterprise to MPP

8811/41/51/61

8832

8845/65

Conversion firmware

sip78xx.TLexE2M-11-2-3C-12.loads

sip7832.TLexE2M-11-2-3C-12.loads

sip88xx.TLexE2M-11-2-3C-12.loads

sip8832.TLexE2M-11-2-3C-12.loads

sip8845_65.TLexE2M-11-2-3C-12.loads

For details on how to obtain the license file from

Page 10 of 30