Cable Electronics CE Labs HSW44C Kullanım Kılavuzu - Sayfa 11

Matris Anahtarlayıcı Cable Electronics CE Labs HSW44C için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Cable Electronics CE Labs HSW44C 13 sayfaları. 4x4 hdmi over cat5 matrix with ir pass-through

Sayfayı Yazdır

CHANNEL CONTROL

MATRIX SIDE

Method A: Push Button

1. Push the red switch button on output port to select which port to be

changed.

Method B: IR Remote Control

a. Choose the output port you want to make channel switch from OUT1

to OUT4 then press 1-4 channel button to choose the HDMI input source

shown on the chosen output display.

IR PASS-THROUGH

IR Sockets

IR Blaster

HSW44C

IR Main: The default location for IR blaster to transmit all IR command

signals received from any of the eight remote receivers to all of the

HDMI sources.

IR1– IR4: IR blaster connected here can only transmit IR command

signals from the remote receivers that are setting at respective input

channel from 1 to 4.

HSMR

IR RECEIVER: IR receiver connected here can receive all IR command

signals from the IR remote controls of HSW44C and all other HDMI source

devices.

IR Receiver