DigiTech RP500 Hızlı Başlangıç Kılavuzu - Sayfa 2

Müzik Pedalı DigiTech RP500 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. DigiTech RP500 2 sayfaları. Installs cubase le 4, x-edit, and usb drivers
Ayrıca DigiTech RP500 için: Zeyilname (4 sayfalar), Yazılım Kurulum Kılavuzu (12 sayfalar)

Sayfayı Yazdır

USING PRESET & PEDALBOARD MODES

A. To toggle between Preset and Pedalboard modes, press the

button.

PEDALBOARD

B. When the

PEDALBOARD

button is lit, the RP500 is in Pedalboard mode and pressing the

footswitches will turn individual effects (e.g., compressor, distortion, etc.) on or off, just like

when using stompboxes on a pedalboard.

C. When the

PEDALBOARD

button is not lit, the RP500 is in Preset mode and the

footswitches will select presets.

Toggle between Preset

and Pedalboard modes

Select presets (Preset mode) or

effects on/off (Pedalboard mode)

SELECTING, EDITING, & STORING PRESETS

A. To select a preset, make sure the PEDALBOARD button is disabled.

1-5

B. Press the UP or DOWN footswitch to select a different bank then press one of the 1-5

footswitches.

C. Turn the TONE LIBRARY and EFFECTS LIBRARY knobs to select other tones/effect chains.

1-5

D. Press the UP/DOWN EDIT buttons to select a specific effect for editing (the selected

effect LED will light). Press the TONE LIBRARY knob to turn the effect on/off. Look at the

parameter matrix and use the KNOBS to edit the effect.

E. To exit Edit mode, press one of the

Press to

Selected

1-5 footswitches.

edit effect

F. To store the preset, press the

STORE button.

G. Use the TONE LIBRARY and

EFFECTS LIBRARY knobs to edit

the preset name.

H. Press the STORE button a 2nd time.

Optional: Press the UP or DOWN

footswitch to relocate the preset.

J. Press the STORE button a 3rd time

to store the preset.

Press to

effect

select a Bank

Press to select a Preset

• 801.566.8800 • digitech.com

RP500 Quick Start Guide

PN: 5059477-A

QUICK START GUIDE