Cisco TelePresence System C20 Plus Başlangıç Kılavuzu - Sayfa 26
Konferans Sistemi Cisco TelePresence System C20 Plus için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Cisco TelePresence System C20 Plus 35 sayfaları. Telepresence conference system
Ayrıca Cisco TelePresence System C20 Plus için: Kullanıcı Kılavuzu (44 sayfalar), Başlangıç Kılavuzu (32 sayfalar), Başlangıç Kılavuzu (46 sayfalar)
Sayfayı Yazdır
Cisco TelePresence Systems
GettinG started Guide
Table of contents
Introduction
Web interface
Using the web interface for system configuration
You have to use the Touch controller or remote control for
the configurations until you know your system's IP address.
Finding the IP address
Tap
More > Settings > System Information
controller; or navigate to
Home > Settings > System
information
if you use the remote control and on‑screen
menu.
In both cases you will find the IPv4 Address and/or IPv6
Address of the system in the NETWORK section on this
System Information page.
Signing in to the web interface
1. Open a web browser and enter the system's IP address
in the address bar.
2. Enter your user name and password and click
The default user name is
admin
with no password set.
If you are not able to connect to the system:
• Make sure the system and computer are connected to
the same network.
• Make sure the system is switched on.
If the system has just been switched on, wait a few minutes
to allow the system to start up.
D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved.
User interfaces
on a Touch
Sign
In.
Configuration
Configuration
Appendices
The web interface
26
www.cisco.com