Argo CLOVER Kullanım Talimatları Kılavuzu - Sayfa 7

Isıtıcı Argo CLOVER için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Argo CLOVER 12 sayfaları. Wall-mounted ceramic fan heater

AUTOMATIC FLAP SWIVEL

Press the

button on the control panel or

ACTIVATION OF SUMMER VENTILATION (FAN) AND HEATING (ECO – COMFORT) MODES

Press the

button on the control panel or

In stand-by mode the LED display is the following:

In Summer ventilation (FAN) mode the LED display is the following:

In ECO heating mode (1100 W) the LED display is the following:

In COMFORT heating mode (2000 W) the LED display is the following:

To return to stand-by mode press the buttons

The default set temperature is 23 °C. The fan heater switches off about 30 seconds after the stand-by mode has been

activated.

ECO SMART FUNCTION

The fan heater operates at maximum power (COMFORT mode) when the set temperature is at least 4 °C higher than

the room temperature; if the set temperature is 0-2 °C higher than the room temperature, the fan heater operates at

medium power (ECO mode), if the room temperature is higher than the set temperature the fan heater switches off and

starts operating again when the room temperature drops 2 °C below the set temperature.

TEMPERATURE REGULATION

The temperature can only be set via the remote control. Press the + or – buttons to regulate the desired temperature

(from 10 °C to 49 °C).

If you set the temperature to 25 °C the "°C" LED comes on as shown in the figure:

Press

to cancel the temperature setting.

ON/OFF DAILY TIMER SETTING

In stand-by mode, press the

pressing on the same button to move on in intervals of 1 h: the default set temperature when it switches on is 23 °C.

When the appliance is operating, to set the switch-off timer press the

V 07/22

on the remote control to select the operating mode..

on the remote control to select the operating mode.

again respectively on the appliance and on the remote control.

button to set the switch-on timer. The switch-on timer can be set from 1 to 12 hours, by

°C

, button; the switch-off button can be set from