Argo CULT Kullanım Talimatları - Sayfa 4

Isıtıcı Argo CULT için çevrimiçi göz atın veya pdf Kullanım Talimatları indirin. Argo CULT 5 sayfaları. Ceramic fan heater

Sayfayı Yazdır
Argo CULT Kullanım Talimatları
Cold ventilation
Thermostat adjustment
knob:
from Minimum "-"
Maximum "+" temperature,
by turning the knob
clockwise.
The
thermostat maintains the desired room temperature by automatically switching on/off the fan heater.
As you rotate the knob clockwise, the room temperature increases.
Operate the unit until the room reaches a comfortable temperature, then turn the knob thermostat knob counter-clockwise until
you hear a "click" and the unit will shut down; then turn again slightly (just a little) the thermostat knob clockwise, in this
position the thermostat will maintain the temperature you have chosen.
The appliance is fitted with an anti tip-up device that prevents it from operating when it detects that the product is inclined.
Do not position the appliance on its side or upside down.
In case of overheating the safety cut out protecting the heating element will automatically switch off the appliance.
In this case the appliance stops working. If this happens:
• switch off the fan heater;
• remove the causes of abnormal operation or overheating (i.e. obstacles in front of air inlet or air outlet grille);
• leave the heater cool down for 15/20 minutes;
• switch on again the fan heater.
ALWAYS UNPLUG THE APPLIANCE BEFORE CLEANING OR MAINTENANCE.
IMPORTANT: DO NOT SUBMERGE THE CERAMIC FAN HEATER IN WATER
Cleaning the outside surface of the appliance
Turn the switch off and unplug before carrying out any maintenance work or moving the appliance.
Use a soft cloth to remove any dust from the fan heater.
If the fan heater is excessively dirty, use a soft cloth moistened with water and a mild detergent at a temperature lower than
50°C. Let the fan heater dry completely before use.
Do not use corrosive detergents or solvents such as petrol. Do not wash the appliance with water.
substances or other items to clean that may damage the surface.
Use a vacuum cleaner to remove dust from the air inlet/outlet grilles.
V 05/15
CONTROL PANEL AND AVAILABLE FUNCTIONS
ECO mode: 1100 W reduced
power and consumption to
save energy .
OFF: fan heater OFF,
position "O".
OVERHEATING SAFETY DEVICE

MAINTENANCE AND STORAGE

ECO mode + OSC =
ECO mode+ OSCILLATION
COMFORT mode:
maximum heating power
(1800 W)
COMFORT mode + OSC =
COMFORT mode+ oscillation
Do not use oils, chemical
9